







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFrameless Glass Shower Enclosures in Boulder City, NV
A frameless glass shower enclosure uses thick tempered glass panels held by minimal metal clips and hinges instead of a bulky framed door, giving a bathroom an open, custom look with nothing but glass between you and the tile. It’s the right call when you’re remodeling a master bath, replacing a cloudy framed unit, or planning a walk-in shower with no curb. We install them as part of full bathroom work, so the tile, waterproofing, plumbing, and glass all get planned together instead of bolted on at the end.
That coordination matters in Boulder City. Older homes here sit on slab with plumbing that’s been repiped more than once, and the dry desert air is hard on glass and seals in its own way. We look at the whole shower assembly before a single panel gets measured. If you’re weighing a full renovation, start with our Bathroom Remodeling in Boulder City page, and when you’re ready to talk through glass, call (888) 282-1693. A live person answers around the clock, and estimates are free.
Groundwork Construction Co. of Boulder City installs these enclosures under our 730-Day Done Right Promise: if it’s not done right, we make it right. Our technicians have up to 12 years of experience, and every one arrives background-checked and in uniform. Upfront pricing means the number you see is the number you pay.

Key Takeaways
- Frameless enclosures are custom-measured to your finished tile, not bought off a shelf, so the order happens after waterproofing and tile are set.
- Expect roughly $1,800 to $4,500 installed in Boulder City, with glass thickness, door style, and hardware driving most of the spread.
- Boulder City’s hard water and dry climate both affect glass care; a treated surface and a squeegee habit keep panels clear far longer.
- Every installation is covered by the 730-Day Done Right Promise, and we answer the phone 24/7.
When You Need Frameless Glass Shower Enclosures
Most homeowners call us when the shower has stopped working for them, not when they’ve decided they want something prettier. Here are the situations we run into most around Boulder City.
- Your framed shower door has gone cloudy or rusted. Aluminum frames trap water at the track, and after a decade the metal pits and the glass hazes over. A frameless panel set removes the track entirely, which is where most of the grime and corrosion lived.
- You’re converting a tub-and-shower combo to a walk-in. Plenty of homes near the Historic District were built with a standard tub alcove. If you’re removing the tub for a larger shower, frameless glass is what makes the new space feel open instead of boxed in.
- You want a curbless or low-curb shower for aging in place. A glass enclosure without a heavy frame lets you see the whole floor, and a curbless design with frameless glass is easier to step into and to clean. We plan the waterproofing and slope carefully so the glass sits on a floor that drains correctly.
- Your current door leaks onto the bathroom floor. Sweeps and seals wear out, and a poorly fitted pivot door can send water out every time someone showers. A properly templated frameless door with a tight seal solves it at the source.
- You’re doing a full bathroom remodel and want the glass to match the finish level. If you’re already replacing tile, vanity, and fixtures, the enclosure is the piece that pulls the room together. Planning it early keeps the reveal lines and hardware consistent.
- You’re selling or renting and need the bathroom to photograph well. Clear frameless glass reads as high-end in photos and in person, and it makes a standard-size bathroom look larger.
If any of those sound familiar, the next step is a walkthrough. We look at the actual shower, not a photo, because glass panels are cut to the millimeter and a wall that’s a quarter inch out of plumb changes the order.

Our Frameless Glass Shower Enclosures Process
Glass is the last thing that goes in, and that’s on purpose. Here’s how a frameless enclosure actually comes together on one of our jobs.
- Walkthrough and measurement plan. We assess the shower footprint, wall condition, plumbing locations, and how you want the door to swing. We talk through panel layout, hardware finish, and whether you want a fixed panel or a hinged door. This is also where the estimate gets built, so you know the number before anything is ordered.
- Waterproofing and substrate check. Frameless glass is heavier and puts different stress on the walls than a framed unit, so the backing and waterproofing have to be right. We confirm the walls are plumb and the shower pan or curb is set before tile goes down. If the tile or plumbing needs work first, we fold it into the project rather than working around a problem.
- Tile and finish installation. Tile, grout, and fixtures go in next. We mark where the glass will land so the tile pattern and any accent lines aren’t cut awkwardly at the door edge. Hardware placement gets set at this stage too.
- Precise templating. Once the finished tile is cured, we template the opening. This is the step that makes or breaks a frameless install. Every cut is measured against the real, finished surface, not the framing, so panels fit tight with consistent reveal gaps.
- Glass fabrication and installation. The tempered glass is cut and tempered to the template, then installed with the hinges, clips, and handle you chose. We check door swing, seal contact, and drainage before we call it done.
- Final walkthrough and care guidance. We show you how the door latches, how to clean the panels, and what to do about hard-water spots. Everything is covered by the 730-Day Done Right Promise, and you get the number to call if anything needs attention.
This work is part of a larger remodel, so it runs alongside the rest of the bathroom. See how we handle the full scope on our Bathroom Remodeling page.
What Affects Frameless Glass Shower Enclosure Cost in Boulder City?
Most frameless enclosures in Boulder City land between $1,800 and $4,500 installed, with a straightforward single fixed panel and hinged door near the low end and a large multi-panel walk-in with premium hardware near the top. Several things move that number.
- Glass thickness. Standard frameless uses 3/8-inch tempered glass. Going to 1/2-inch adds cost but gives a heavier, more solid feel and less flex on larger panels.
- Number and size of panels. A single door is the simplest. Adding a fixed side panel, a return panel, or a full three-sided enclosure increases both material and labor.
- Door style. A hinged door is common and straightforward. A sliding or barn-style door needs different hardware and wall support, which adds to the price.
- Hardware finish. Brushed nickel and chrome are the workhorses. Matte black, oil-rubbed bronze, and gold finishes cost more and sometimes have longer lead times.
- Glass treatment. A factory-applied protective coating helps resist water spotting in Boulder City’s hard water. It’s worth it here, but it’s an add.
- Wall and layout condition. If the shower walls are out of plumb or the layout is unusual, extra templating and custom cuts are needed. Floors that need leveling or a curb that needs rebuilding add to the scope.
We put all of this in a written estimate with the numbers broken out, so nothing gets added later. That’s our no-hassle upfront pricing: the number you see is the number you pay. Projects over $10,000 qualify for $1,000 off, and we offer 0% financing for 18 months so a larger bathroom project doesn’t have to wait for a lump sum. Every estimate and design consult is free.
Rough Frameless Enclosure Price Ranges in Boulder City
| Configuration | Typical Installed Range |
|---|---|
| Single fixed panel (no door) | $1,400 – $2,400 |
| Single hinged door, no side panel | $1,800 – $3,000 |
| Door plus one fixed side panel | $2,600 – $3,800 |
| Three-sided walk-in enclosure | $3,200 – $4,500 |
| 1/2-inch glass upgrade | Add $300 – $700 |
| Protective glass coating | Add $150 – $350 |
These are planning ranges, not quotes. Your actual number depends on the measurements and the finishes you choose, which is why we template before ordering. Call (888) 282-1693 for an exact figure, and we’ll walk you through the options.
Repair or Replace: What Makes Sense for Your Shower?
Framed shower doors are often repairable when the problem is a worn sweep, a loose hinge, or a cloudy panel that can be cleaned or replaced. But once the frame itself is pitted, the door won’t close square, or water is getting behind the frame and into the wall, replacement is usually the better money. The leak behind a frame can rot the tile backer and the studs before you notice it, and that repair costs more than the new glass.
If you’re already remodeling the bathroom, replacing the enclosure is almost always the right call. The old glass comes off during demolition and the new enclosure goes in as part of the finished product, covered under the same 730-Day Done Right Promise. Call us and we’ll give you a straight answer for your specific shower, not a sales pitch.
Matching Glass Hardware to the Rest of Your Bathroom
The hardware finish is where most people second-guess themselves. A brushed nickel or chrome hinge reads neutral and works with almost any tile and plumbing finish. Matte black is the current favorite for a stronger contrast against light tile and white vanities. Oil-rubbed bronze and antique brass suit traditional or warmer palettes. Whichever direction you go, we match the shower door handle and hinges to the faucet and cabinet pulls so the room feels intentional.
For flooring and surrounding surfaces, the same principle applies: pick finishes that hold up in a wet, dry-climate bathroom. We’ll help you coordinate tile, curb, and glass so the finished shower looks like one decision, not four.
Care and Cleaning for Boulder City’s Hard Water
Boulder City’s water runs hard, which means the biggest threat to a clear glass enclosure is mineral spotting, not vandalism or wear. A few habits go a long way. A squeegee after each shower, a weekly wipe-down with a gentle cleaner made for glass, and a factory-applied protective coating all keep the panels clear far longer. Avoid abrasive pads and harsh acid cleaners, which can dull the glass and wear the hardware finish.
The other thing we see is the door seal and sweep wearing out. That’s normal, and it’s replaceable. We give you the care sheet when we finish, and if something needs a look, the phone is answered 24/7.
Why Frameless Glass Shower Enclosures Are Worth It
A frameless enclosure does three things at once: it makes the bathroom look bigger and more custom, it removes the moisture-trapping frame where mold and corrosion grow, and it works with the rest of a remodel instead of looking bolted on. In a market where buyers are picky and photos sell, a clean frameless shower is one of the few bathroom upgrades that’s obvious on a listing and in person.
It’s also a long-term choice. Get the waterproofing, templating, and hardware right and the enclosure will outlast the finishes around it. That’s the reason we plan the glass alongside the tile and plumbing from the very first site visit. Groundwork Construction Co. of Boulder City has been in business since 2014, and the 730-Day Done Right Promise is one of the longest workmanship guarantees in residential construction. We back this work in writing.
Service Area: Boulder City and Beyond
We serve homeowners throughout Boulder City and the surrounding area, from the older homes near downtown to newer builds on the east side. If you’re just outside Boulder City, call and we’ll tell you quickly whether we cover your address. We also work in nearby communities and can help with related projects like kitchen remodeling, roofing, windows and doors, fence installation in Boulder City, and driveway and pavers in Boulder City. Our home additions and ADU work often includes an added bathroom with a frameless shower.
For related work in nearby markets, see our pages on bathroom remodeling in Henderson, bathroom remodeling in Las Vegas, and bathroom remodeling in North Las Vegas.
Schedule Your Free Frameless Enclosure Estimate
The most useful thing you can do is get a real measurement. Call (888) 282-1693 and we’ll schedule a free estimate and design consult at your home. We’ll look at the shower, talk through your options, and give you a written price with no surprises. If the work needs plumbing or tile first, we’ll tell you, so the estimate covers the whole job, not just the glass. A live person answers any hour of the day. From foundation to finish line, we handle the whole thing and back it in writing.
FAQs – Frameless Glass Shower Enclosures
How much does a frameless glass shower enclosure cost in Boulder City?
Most frameless enclosures in Boulder City run about $1,800 to $4,500 installed, depending on the number of panels, glass thickness, door style, and hardware finish. A single fixed panel is at the low end, and a three-sided walk-in with premium hardware is at the top. Call (888) 282-1693 for an exact quote; estimates are free.
Can you install a frameless enclosure the same day?
No. Frameless glass is custom-templated and fabricated, so it can’t be installed in one visit. The install itself takes a few hours once the glass is ready, but the templating has to wait until the finished tile is set. We give you a realistic schedule up front, and most jobs are completed in a single visit once the glass arrives. Call (888) 282-1693 to schedule a walkthrough.
Do I need to remodel the whole bathroom to get frameless glass?
Not always. If the walls and shower pan are sound and plumb, we can often install a frameless enclosure on the existing shower. If the walls are out of square, the tile is loose, or there’s a leak, that work has to happen first, and we’ll tell you honestly which situation you’re in. Call (888) 282-1693 and we’ll take a look.
Is it cheaper to repair or replace a framed shower door with frameless glass?
A small repair like a new sweep or hinge is cheaper than a new enclosure. Once the frame is corroded, the door won’t close square, or water has gotten behind the frame, replacement is the better money because hidden water damage costs more to fix later. Call (888) 282-1693 and we’ll give you a straight answer for your shower.
Written by the team at Groundwork Construction Co. of Boulder City, serving Boulder City.


