







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Enterprise, NV: What to Expect
Concrete driveways and concrete work in Enterprise, NV typically run $4,500 – $12,000 for a new driveway, with most single-family production homes in the 89139 ZIP landing between $6,000 and $9,000 once tear-out, caliche breaking, and HOA-compliant finishing are included. A standard replacement takes 5 – 8 working days from demo to the day you can park on it, and summer pours are scheduled at dawn to beat the heat. Call (888) 282-1693 and we’ll walk your lot, check your HOA’s architectural rules, and give you a written line-item number before anything gets broken out.
How We Build a Concrete Driveway in Enterprise: The Sequence

Concrete isn’t a surprise job. Every stage has a fixed order, and knowing the order is how you spot a contractor who’s cutting corners.
Stage 1: Site Visit and HOA Document Check (Day 1)
We measure the existing slab, note the apron and sidewalk joints, and photograph the current finish so a replacement matches what the subdivision was built with. At the same meeting we ask for your HOA’s architectural guidelines, because in Enterprise the design review board often has the final say on color, finish, and whether a widened apron is allowed at all. You’ll decide the footprint and finish family at this stage.
Stage 2: Tear-Out and Excavation (Days 2 – 3)
The old slab comes out with a skid-steer and breaker. Under many south-valley lots sits caliche hardpan, and that’s where a two-day demo can stretch: rock-breaking takes longer than plain digging and adds labor. We confirm the sub-base depth and slope now, because grading on a desert lot has to shed monsoon runoff away from the slab and the garage sill.
Stage 3: Form, Rebar, and Dust Control (Day 3)
Forms go in to the approved footprint, then #3 or #4 rebar on a grid, tied and chaired off the dirt. If your project touches right-of-way or disturbs bare ground, we handle the dust-control permit and watering schedule the county requires. You’ll confirm thickness here: 4 inches for a standard residential drive, 5 – 6 inches if you park a heavy truck or RV.
Stage 4: Pour and Finish (Day 4, dawn start)
Pours in Enterprise start at first light. Summer heat speeds curing, and concrete placed in the afternoon cracks before the finisher can trowel it. We pour, screed, and finish to the agreed texture. Most HOA-approved finishes are a light broom with a decorative border or a salt finish; exposed aggregate is sometimes restricted, which is why we confirm the finish before the truck arrives.
Stage 5: Cure, Joints, and Walkthrough (Days 5 – 8)
Control joints get cut within 24 hours to steer cracking, and we keep foot traffic off for 24 – 48 hours and vehicles off for 7 days. At the final walkthrough you get a written closeout noting the mix design, thickness, and finish. The work is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Concrete is a family of choices, not one product. Here’s what actually gets decided on an Enterprise driveway, and the honest trade-off on each.
- Standard gray broom finish: The lowest-cost choice at the bottom of the range. Durable and code-friendly, but it shows tire marks and desert dust quickly. Fine for a rear pad, less ideal for a front-facing drive in a design-reviewed community.
- Decorative border or salt finish: Adds $400 – $1,200 over standard. Gives the driveway a finished edge the HOA usually approves without argument, and it holds up well under UV.
- Exposed aggregate: Attractive and slip-resistant, but check your architectural guidelines first because some Enterprise HOAs restrict it. Premium finishes can run to the high end of the $12,000 ceiling.
- Thickness (4 inch vs. 5 – 6 inch): A 6-inch slab costs more in material but holds up under heavier vehicles and reactive soil. Worth it if you park a truck or trailer.
- Reinforcement (mesh vs. rebar): Rebar on a chaired grid is the stronger standard for a load-bearing drive; welded wire mesh is cheaper and adequate for light foot-traffic pads.
Where a driveway is part of a bigger front-yard rebuild – new walkways, an extended apron, a matching front porch slab – we scope it with our Driveway & Pavers work so the joints and finish stay consistent across the whole approach.
What Concrete Driveways & Concrete Work Costs in Enterprise, NV

Concrete driveway installation in Enterprise runs $4,500 – $12,000, and a straight replacement sits at $5,000 – $14,000. The wide spread is real, not sales padding: the same 400-square-foot drive can land at either end of that range depending on a handful of variables.
What pushes a job toward the low end: a flat, simple rectangle, easy access for the truck and skid-steer, a standard gray broom finish, and a shallow sub-base with no caliche to break. What drives it to the high end: curved or flared layouts that complicate forming, heavy caliche requiring rock-breaking, thicker slabs, upgraded decorative finishes, or a widened apron that triggers a longer HOA review. Adding a dust-control permit and inspection chain also adds time and cost.
A written estimate from us itemizes demo, excavation and haul-off, sub-base prep, rebar, concrete volume and mix, finish, joints, and permit fees. What it typically doesn’t cover: moving a gas or water line that crosses the footprint, or unexpected utility conflicts we can’t see until the slab is out. If we find one, we stop and show you the change in writing before we proceed. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Enterprise Homes Specifically Do to This Job
Enterprise is one of the fastest-built-out master-planned corners of the south valley, and that shapes concrete work here in ways it wouldn’t in an older, infill neighborhood. A huge share of the housing went up within a short window by a handful of big builders, so the driveways repeat block after block – the same width, the same joint spacing, the same builder-grade 4-inch slab. When one neighbor’s drive cracks and heaves, the ones on either side are usually headed the same way.
That repetition is where the HOA angle bites. Design review boards in these subdivisions expect replacements to match the original finish and color, and a slab that reads slightly different from the house next door draws a violation notice. We pull the community’s architectural guidelines before the pour and match the finished color and texture to the approved standard, so your new drive looks like it belongs.
Below the surface, the south-valley caliche hardpan means excavation often needs rock-breaking rather than plain digging, and the desert heat means we schedule summer pours at dawn. Those two facts alone explain most of the schedule and cost variance on a concrete job in the 89139 ZIP. We cover the wider Enterprise area, from the master-planned tracts to the edges where new build-out is still active.
Homeowners often pair a driveway rebuild with utility trenching for an outbuilding; when they do, the digging overlaps with our ADU Site Prep & Utilities in Enterprise work. And if you’re refreshing the front of the house at the same time, matching entry or garage doors is a natural companion – our Door Installation in Enterprise service keeps the curb line consistent. A driveway is rarely a standalone project; it’s usually part of a full Driveway & Pavers in Enterprise scope once the front yard gets reconsidered.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Concrete Driveways & Concrete Work in Enterprise

A typical concrete driveway in Enterprise takes 5 – 8 working days from demo to the day you can drive on it. Demo and excavation run 2 – 3 days, the pour happens on day 4, and curing keeps vehicles off for about a week. Caliche breaking or HOA review can add a few days. Call (888) 282-1693 for a schedule that fits your specific lot.
Yes, in most Enterprise subdivisions you’ll need both a county-level permit for the work and your HOA’s architectural review approval before anything gets poured. The design review board controls finish, color, and the approved footprint. We handle the permit paperwork and coordinate the dust-control requirements, and we check the architectural guidelines with you up front so the finished slab clears review the first time.
In most cases, yes – a driveway replacement stays in the same footprint and doesn’t touch interior plumbing or structure. The exception is a utility line running under the slab, which we flag during the site visit. If a conflict turns up after tear-out, we stop and price the fix in writing before proceeding.
Concrete driveway installation in Enterprise costs $4,500 – $12,000, and a full replacement runs $5,000 – $14,000 depending on size, finish, and how much caliche has to be broken out. Call (888) 282-1693 for an exact quote – estimates are free and itemized line by line.
Every driveway we pour is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years. That covers workmanship like finish and jointing. We put it in writing at the final walkthrough so you’re not relying on a handshake. Call (888) 282-1693 to get your estimate started.
Get Your Free Concrete Driveway Estimate in Enterprise
If you’re ready to price a new driveway or concrete pad in Enterprise, call (888) 282-1693 for a free on-site estimate. A live person answers 24/7, so you won’t hit voicemail. We’ll visit the lot, check your HOA’s architectural rules, and hand you a written line-item estimate with upfront pricing and no surprises. Ask about $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co.












