







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in North Las Vegas, NV: What the Job Really Involves
Cabinets and countertops in North Las Vegas typically run $14,000 – $45,000 for a full tear-out and replacement, and most projects take two to four weeks from demolition to the last bead of caulk. The bulk of that time isn’t installation; it’s templating, fabrication, and the gap between when your old counters come out and the new slab is set. Call (888) 282-1693 for a free on-site estimate and a written, line-item quote before anything gets ordered.
How we run a cabinet and countertop replacement, stage by stage

This is not a one-visit job, and anyone who tells you it is hasn’t templated a counter in a real North Las Vegas kitchen. Here’s the actual sequence, with the decisions you’ll make along the way.
Stage 1: Measure, design, and order (week one)
We measure the room, check wall plumb and floor level, and lay out the cabinet run with you. You pick door style, finish, and box construction here. This is also when the counter material gets chosen, because the fabricator’s lead time drives the whole schedule. Expect three to seven days from decision to order placement.
Stage 2: Demolition and prep (one to two days)
Old cabinets and counters come out. We shut off and cap the water lines and pull the old disposal if it’s staying. If the wall behind the cabinets is damaged, or the floor under them is out of level, that gets addressed now, not after the new boxes are in. This is the stage where surprises surface, and we photograph everything.
Stage 3: Cabinet installation (two to three days)
Base and wall cabinets get set, shimmed, and leveled, then fastened to studs. Crown, light rail, and filler pieces go on after. You decide at this point whether you’re keeping the existing appliance openings or changing them, because that affects the box sizes. Handles and pulls go on last so they don’t get scratched.
Stage 4: Template and fabrication (five to ten days)
The counter fabricator comes out to template once the cabinets are set and level. That template is the single most important measurement in the job; a counter cut to a bad template will not fit, period. Slab fabrication takes five to ten days for most quartz and granite, longer for unusual edge profiles or a material on backorder.
Stage 5: Counter set, sink, and finish (one to two days)
The slab goes in, the sink and faucet get set, and the seams get epoxied. Then it’s caulk, cleanup, and a walkthrough. If this is part of a Kitchen Remodeling in North Las Vegas project that includes new flooring or lighting, we sequence those trades around this work so nothing gets torn up twice.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Most of the money and most of the regret live in these decisions. Here’s the honest version of each.
- Stock vs. semi-custom cabinets. Stock boxes are cheaper and available now, but they come in fixed sizes and few finishes. Semi-custom (KraftMaid is the line we work with most) gives you real size and finish choices and holds up better in a desert climate where cabinet doors swell and shrink with indoor humidity swings. The trade-off is six to ten weeks of lead time and a higher price.
- Quartz vs. granite. Quartz is non-porous, doesn’t need sealing, and handles the hard water and heat of North Las Vegas without staining. Granite is natural stone, needs resealing every year or two, and every slab is different. Quartz is the safer pick for a busy kitchen; granite is for the buyer who wants a one-of-a-kind slab and doesn’t mind the maintenance.
- Slab thickness and edge profile. Standard 3cm slab with a simple eased edge keeps cost down. A 2cm slab with a built-up edge, or a mitered or waterfall edge, adds fabrication labor fast. You’ll feel it in the quote.
- Sink and faucet configuration. An undermount sink needs the fabricator to cut and polish the opening, which adds cost but looks cleaner. A drop-in sink is cheaper and simpler to replace later. Single-basin vs. double is a workflow decision, not a cost one.
- Drawer and door hardware. Soft-close hinges and full-extension drawer glides are worth the upgrade. Cheap glides fail first in a household that actually cooks.
What cabinets and countertops cost in North Las Vegas, NV

The lead range for this work is $14,000 – $45,000, and here’s how a job lands at the low vs. high end.
- Cabinet installation alone: $4,000 – $13,000.
- Countertop installation alone: $2,000 – $6,500.
- Kitchen island installation: $3,000 – $10,000.
Five variables push the number up or down. First, the size of the run: a small galley in an older 89030 home is not the same job as a large open kitchen in Aliante. Second, existing condition: out-of-level floors or damaged drywall add prep time. Third, whether plumbing or electrical has to move, which means opening walls and pulling a permit. Fourth, material grade: a stock box with a laminate top sits near the floor of the range, semi-custom with quartz near the ceiling. Fifth, whether this is a standalone swap or part of a larger scope.
A written estimate from us includes demolition, haul-away, cabinet supply and install, counter template and fabrication, sink set, and cleanup. It typically does not include new appliances, backsplash tile (that’s a separate job with its own page), or structural changes. We give you the number up front and it’s the number you pay. No change orders for things we should have caught at the measure.
See the difference
Before
After
Before
After
Before
AfterWhat North Las Vegas homes specifically do to this job
North Las Vegas is one of the fastest-growing large cities in the country, and that growth shows up in the cabinets. In the master-planned communities like Aliante and Skye Canyon (the 89084 and 89085 ZIPs), we’re regularly working in tract homes built in the 2000s and 2020s where the original builder-grade cabinets are hitting the end of their useful life at the same time. Those kitchens have slab-on-grade floors that are usually flat and walls that are usually plumb, which makes for a cleaner install. In the older 89030 and 89031 ZIPs, we see 1960s – 70s homes where the cabinet boxes were built in place, the walls are out of plumb, and the counter footprint doesn’t match anything off the shelf. Both are real jobs; they’re just not the same job. We cover the whole city, from the 89033 and 89086 ZIPs out to the older corridor, and you can see the full North Las Vegas service area for how we schedule around the summer heat. Because the Mojave summer regularly pushes past 105°F, we start early and time delivery and fabrication so the slab isn’t sitting in a hot garage for a week. Permits are pulled when plumbing or electrical moves, and inspections pass before we close up walls. If your cabinets and counters are part of a bigger plan, homeowners often pair this with a Garage Conversion ADU in North Las Vegas or a New Detached ADU in North Las Vegas where the same selection process applies to a second kitchen.
Serving North Las Vegas, NV – Our Local Coverage Area
We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: cabinets and countertops in North Las Vegas

Most jobs take two to four weeks from demolition to final walkthrough, with the biggest variable being counter fabrication lead time. Stock cabinets and standard quartz move faster; semi-custom boxes and unusual slabs add a week or more. Call (888) 282-1693 for a schedule based on your actual selections.
You need a permit if the work moves plumbing, electrical, or gas, or changes the structural layout; a straight swap of cabinets and counters in the same footprint usually doesn’t require one. We tell you which side of that line your job falls on before we start, and we pull the permit when it applies.
Yes, and that’s the most common way we do it. Keeping the sink and appliance locations fixed means no wall openings, no permit for plumbing, and a faster schedule. If you want to relocate the sink or add a prep sink, that’s a different scope and we quote it that way.
The range is $14,000 – $45,000 depending on cabinet grade, counter material, and whether plumbing or electrical moves. A standalone countertop swap runs $2,000 – $6,500 and cabinet installation alone runs $4,000 – $13,000. Call (888) 282-1693 for an exact quote, with a free on-site estimate.
Every project is covered by our 730-Day Done Right Promise: if it isn’t right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and material warranties from the cabinet and counter manufacturers stack on top of it.
Get a free estimate on cabinets and countertops in North Las Vegas
We’ll come out, measure the room, check the walls and floor, and put a written, line-item quote in your hands. You’ll see exactly what’s included and what isn’t, and you’ll know the number before anything is ordered. Call (888) 282-1693 for a free estimate on cabinets and countertops in North Las Vegas. A live person answers around the clock. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available, and our Kitchen Remodeling team handles the wider scope if your project grows.
Written by the team at Groundwork Construction Co.












