







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterNew Construction Windows vs Replacement Windows in Boulder City, NV: Which One Fits Your House?
Choose replacement (insert) windows unless you’re relocating or enlarging an opening. For most Boulder City homes, especially the 1930s Hoover Dam-era cottages near the historic district, an insert window that drops into the existing frame limits structural disturbance, keeps the original exterior profile, and lowers preservation-review risk. New-construction windows make sense when the rough opening itself is moving. The choice is less about cost than about what your walls can handle. Call (888) 282-1693 and we’ll tell you which one your house actually needs.

Groundwork Construction Co. of Boulder City works on both types every week, and the honest answer depends on framing nobody can see until the trim comes off.

The Real Difference Is Mechanical, Not Cosmetic
A Windows & Doors project starts with one question: does the window attach to framing or to another window?
New-construction windows ship with a nailing fin around the perimeter. The installer fastens that fin to the rough framing, then the siding or stucco closes over it. The window becomes part of the wall assembly. Replacement windows, also called insert windows, come without a fin. They seat inside the existing frame and get fastened through the jamb. The original opening stays where it is.
That single difference drives everything else: how much wall gets opened, whether the exterior reveal changes, how long the job takes, and what a preservation commission might say about it.
- New-construction window: nailing fin, attaches to rough framing, requires disturbing siding or stucco, best when the opening moves or grows.
- Replacement window: no fin, seats in the existing jamb, leaves the exterior finish mostly intact, best when the opening stays put.
Why Boulder City’s 1930s Bungalows Change the Decision
Boulder City was built as a federally chartered company town in 1931 to house Hoover Dam workers, and the historic core still holds most of those original bungalows and modest cottages. Many sit on pier-and-beam foundations with stucco-over-frame or unreinforced brick walls. Those walls were never designed around a modern nailing fin.
Drive a fin into an unreinforced rough opening and you’re asking a Depression-era frame to carry load a different way than it was built to. In some houses that’s fine. In others it opens a can of worms.
Now add the ground movement. The expansive desert soils around Boulder City shrink and swell with the seasons, and after ninety years a lot of these rough openings have racked slightly out of square. Drop an insert window into a racked opening without correcting the frame first and you get an air and water gap along one edge. That gap quietly kills the energy performance you paid for, and in a place where summer highs run 100-110°F with relentless UV and almost no humidity, you’ll notice it on the power bill long before you notice it visually.
Our technicians have up to 12 years of experience squaring these frames before a new unit goes in. It’s the step most quick quotes skip, and it’s the one that decides whether a window actually performs.

The Preservation Angle Most Contractors Miss
In the historic district, exterior alterations, additions, and even window replacements can trigger review under Boulder City’s preservation ordinances. A standard vinyl quote for a 1930s cottage can come back with a requirement to match the original divided-light wood profile.
Here’s where the two window types diverge in ways that matter to a reviewer. New-construction windows expose more of the rough opening during installation and shift the exterior reveal depth relative to the original stucco face. If the guidelines require the final reveal to match the original profile, that extra depth can work against you. An insert window preserves the original reveal because the original frame never moves.
Jobs that would be a simple swap in Henderson turn into preservation-sensitive projects here. Knowing the rules before you order a unit saves a lot of backtracking.

Side-by-Side: New Construction vs. Replacement Windows
| Factor | New-Construction Window | Replacement Window |
|---|---|---|
| Attaches to | Rough framing via nailing fin | Existing window frame |
| Exterior finish | Stucco or siding opened and refinished | Largely untouched |
| Reveal depth | Changes; may conflict with historic profile | Preserved from original |
| Best for | Relocated or enlarged openings | Same-size swaps in sound frames |
| Structural disturbance | Higher | Lower |
| Preservation-review risk | Higher | Lower |
| Typical Boulder City range | Part of $8,000-$25,000 impact window scope | $4,500-$15,000 window replacement |
Those ranges reflect full-project pricing, not per-unit. A single historic-district window replacement usually lands near the low end because the scope is smaller. That’s why we start every job with a free project estimate and design consult, so you see the real number before anything gets ordered.
When New-Construction Windows Are the Right Call
If you’re moving a window, enlarging an opening for a remodel, or adding a window where no opening exists (a common ask during an addition or ADU project), new-construction is your only option. The framing has to be built or rebuilt before any unit goes in. On those jobs, the fin is what ties the whole assembly together, and the exterior finish gets redone anyway.
What the Finished Reveal Should Look Like
Reveal depth is the visible set-back between the window glass plane and the surrounding stucco face. On a historic cottage, matching the original reveal is often the difference between a smooth review and a revision. We check the existing reveal before recommending anything. If a new-construction unit would push the window too far forward or back, we say so instead of installing it and hoping.
Materials That Meet Both the Spec and the Aesthetic
Our window brand partners include Andersen and Marvin, and both lines carry profiles in wood, clad, and fiberglass that fit the divided-light look the historic district expects. That means a homeowner can get modern glazing performance inside a profile that reads as period-correct from the street. We also work with trusted partners across every trade, from KraftMaid and Cambria in kitchens to GAF and CertainTeed on roofs, so a whole-house project stays coordinated under one contractor.
Whatever goes in, the 730-Day Done Right Promise covers the unit and the installation together. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it means the window-type decision gets made on what’s best for the house, not on which install is cheaper to sell.
Pricing Without Guesswork
Upfront pricing means the number you see is the number you pay. Standing offers make a larger project easier to budget: 0% financing for 18 months, $1,000 off projects over $10,000, and a free estimate and design consult. Calls are answered by a live person 24/7, and every technician is background-checked and arrives in uniform. You can read more about how we handle Boulder City service area projects, and our home page lays out the full scope of what we do.
Key Takeaways
- Replacement (insert) windows are the right call for most Boulder City historic-district homes; new-construction windows when an opening moves or grows.
- Racked rough openings from decades of desert soil movement need correction before any insert goes in, or you lose energy performance.
- Reveal depth changes with new-construction units and can conflict with preservation requirements.
- Both types are covered by the 730-Day Done Right Promise.
FAQs
Yes for a same-size swap in a sound frame. A properly spec’d replacement window delivers the same glazing performance as a new-construction unit, and in a Boulder City historic cottage it usually performs better because the original reveal and wall assembly stay intact. Call (888) 282-1693 for an exact quote.
Sometimes yes. Window replacement in the historic district can fall under preservation review, particularly when the exterior profile or reveal would change. An insert window that preserves the original profile is the lower-risk path. We’ll walk you through what your specific address needs, free of charge.
Window replacement runs $4,500-$15,000 for a full project, and impact window installation runs $8,000-$25,000. Historic-district cottages with fewer units often land near the low end. Call (888) 282-1693 for a free, no-hassle estimate.
Usually, and the cause is often an out-of-square rough opening that wasn’t corrected before the unit went in. Air and water gaps from a racked frame show up fast in Mojave heat. We’ll assess it and tell you straight whether it’s a frame correction or a full replacement.
If you’d rather have it looked at than figure it out alone, Groundwork Construction Co. of Boulder City offers a no-pressure assessment in Boulder City. We’ll check the framing, the reveal, and the preservation picture, then give you a straight recommendation. Call (888) 282-1693.
Written by the team at Groundwork Construction Co. of Boulder City, serving Boulder City, NV.


