







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Boulder City Homeowners Choose Belgard Construction
We provide independent Belgard construction service in Boulder City, from paver patio installation to driveway replacement, and we’re not affiliated with, authorized by, or endorsed by Belgard. What sets our Belgard work apart is the base. We build structural base and drainage for desert freeze-thaw and monsoon runoff, not the minimal base that gets pavers down fast and fails in three years. Belgard systems are only as good as what’s under them, and in Boulder City that matters more than anywhere else we work.

Call (888) 282-1693 for a free estimate on your Belgard project.
Why Trust Groundwork Construction Co. of Boulder City for Your Belgard Construction?

Our technicians have up to 12 years of experience with Belgard systems, and they know the difference between a paver that’s failing from a bad install and one that’s failing from the material itself. That matters when you’re deciding whether to repair or replace. We work with genuine Belgard pavers and wall blocks for color and dimensional match on repairs and expansions, and we specify quality aftermarket polymeric sand and base aggregates that hold up better than the manufacturer’s standard in Boulder City’s alkaline soil and 110°F summers.
Every project is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to Belgard installs the same as everything else we build. We pull permits where required, pass inspections, and document what we did so your Belgard warranty stays intact. Work that voids a manufacturer warranty is work that costs you twice.
Our technicians are background-checked and arrive in uniform. Calls are answered by a live person 24/7, so you’re not leaving a message and hoping someone calls back before the next monsoon.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Boulder City
Belgard products fail in specific ways here, and the causes are local. These are the five issues we see most often.
- Efflorescence on Mega-Arbel pavers. That white, chalky staining is calcium hydroxide migrating to the surface and evaporating. Boulder City’s alkaline soil and alkaline irrigation water make it worse, and poor drainage underneath gives it a place to keep coming back. Cleaning treats the symptom; fixing grading and drainage treats the cause.
- Polymeric sand joint failure and erosion. Monsoon-season runoff scours joints that weren’t properly compacted or filled, and once sand washes out, pavers start to shift. The real problem is usually base compaction, not the sand itself.
- Retaining wall block shifting or bulging on Catalina stone walls. Catalina stone looks solid until the wall starts to lean. That lean almost always traces back to inadequate geogrid reinforcement or drainage that lets water build up behind the wall and push it out.
- Surface spalling and color fade on Urbana pavers. Intense UV exposure dulls the color over time, and deicing salt use can cause the surface to flake. Boulder City’s dry air and high-altitude sun are hard on any concrete paver, but salt damage is preventable.
- Weston Stone movement from expansive soils. Desert soils shrink and swell with moisture, and walls built without proper base prep or drainage will move with them. We’ve seen Weston Stone courses shift a half-inch in a single season when the base wasn’t engineered for the soil.
A typical case: a homeowner notices white, chalky staining spreading across their Belgard Mega-Arbel driveway after a few years. The cause is efflorescence, often worsened by poor drainage and alkaline water. A qualified local pro will first confirm the source, then clean with a mild acid solution, apply a breathable sealer, and correct grading or drainage to prevent recurrence.
Belgard Parts & Our Repair-vs-Replace Approach
We source genuine Belgard pavers and wall blocks for repairs and expansions so color and dimensions match what’s already on your property. We don’t claim to keep Belgard stock on hand, and we won’t tell you we do. Parts get ordered for your specific job and your specific product line, which takes a little longer but means the match is right.
For polymeric sand and base aggregates, we often specify quality aftermarket products that outperform OEM in Boulder City’s conditions. That’s a judgment call we explain before we make it, not after.
On repair versus replace, we’re honest about the line. Isolated damage, a few cracked pavers, one section of failed joints: repair usually makes sense and saves real money. Widespread efflorescence that keeps returning, or a retaining wall that’s structurally failing, is a different story. In those cases, patching over the problem just delays a bigger bill, and we’ll tell you so. We’d rather lose the small repair than sell you a fix that won’t hold.

Call (888) 282-1693 and we’ll walk your Belgard project and give you a straight answer on which path makes sense. Estimates are free.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We walk the property, identify the Belgard product line, and trace the failure to its actual cause. Efflorescence isn’t always drainage, and a bulging wall isn’t always geogrid. Getting this wrong means the fix fails again.
- 2
Repair or install. For repairs, we match genuine Belgard pavers or blocks to your existing run. For new patios and driveways, we excavate to proper depth, compact the base in lifts, and set drainage and grading before a single paver goes down.
- 3
Test and verify. We check slope and drainage with water, confirm joints are filled and compacted, and make sure the finished surface sheds water away from your foundation and walls.
- 4
Warranty and documentation. You get our 730-Day Done Right Promise in writing, plus the product and installation details you need to keep your Belgard warranty intact. If something’s off, we come back and fix it.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Boulder City
We work with Belgard Mega-Arbel pavers for driveways and patios, Urbana pavers for modern, clean-lined surfaces, Catalina stone for retaining walls that need to hold back grade, and Weston Stone for walls and garden features. We handle paver patio installation, paver driveway installation, and full driveway replacement, including removing old concrete or failed pavers and rebuilding the base from scratch. Whether you’re matching an existing run or starting fresh, we’ll spec the right series for the load and the drainage situation.
We Also Service These Brands
Belgard is one piece of what we do. Groundwork Construction Co. of Boulder City works with KraftMaid for cabinetry, Kohler for plumbing fixtures, GAF for roofing, and PGT for windows, alongside a curated set of other verified brand partners. If your project touches more than hardscape, you’re working with one contractor from foundation to finish line, not three separate crews who never talk to each other.
FAQs – Belgard Construction Service in Boulder City

Is Groundwork Construction Co. of Boulder City authorized by Belgard? No. We’re an independent Belgard service provider, not authorized, sponsored, or endorsed by the manufacturer. We work with Belgard products daily and install them to spec, but any warranty claim or product question goes through Belgard directly. Call (888) 282-1693 for a free estimate.
Do you use genuine Belgard or OEM parts? Yes for pavers and wall blocks. We source genuine Belgard product for repairs and expansions so color and dimensions match. For polymeric sand and base aggregates, we sometimes specify quality aftermarket products that hold up better in Boulder City’s conditions, and we’ll explain why before we use them.
How long does Belgard service take? Isolated repairs like a section of failed joints or a few cracked pavers are often done in a single visit. A full paver driveway or patio install typically takes several days depending on square footage, base depth, and drainage work. We give you a timeline with your written quote, not a vague “a few days.”
What Belgard models and series do you cover? Mega-Arbel pavers, Urbana pavers, Catalina stone wall blocks, and Weston Stone wall blocks, plus the related base, drainage, and polymeric sand work that makes them last. If you have a different Belgard line, call and we’ll tell you whether we can source it.
Will your service void my Belgard warranty? Properly installed Belgard products with genuine materials and correct base prep keep your manufacturer warranty intact. The risk comes from shortcuts: too little base, wrong sand, no drainage. Our 730-Day Done Right Promise covers our workmanship on top of whatever Belgard covers. Call (888) 282-1693 with questions about your specific product.
How much does Belgard construction cost in Boulder City? Most Belgard projects here fall into the ranges below. Patio work runs less than a full driveway, and driveway replacement depends on how much base and drainage correction is needed underneath.
| Service | Price Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
Call (888) 282-1693 for an exact quote on your Belgard project. Estimates are free, and we put the number in writing.
Book Your Belgard Service in Boulder City, NV
Whether your Belgard pavers need repair or you’re planning a new patio or driveway, we’ll walk the site, diagnose the real issue, and give you upfront pricing with no surprises. Call (888) 282-1693 for your free estimate and design consult. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co.












