







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Boulder City Homeowners Choose Toto Construction
Groundwork Construction Co. of Boulder City provides independent Toto construction service: we repair, replace, and install Toto toilets, Washlet seats, and the surrounding bathroom work, and we do it with a repair-first mindset rather than a sales pitch for a full fixture swap. What makes our Toto work different is that we know where these products actually fail, and we plan around it. We’re an independent Toto service provider, not affiliated with or authorized by Toto, and we’re upfront about that. Boulder City homeowners call us at (888) 282-1693 because the diagnosis comes before the quote, and the quote holds. Toto’s china is excellent. The parts around it are what wear out.

Why Trust Groundwork Construction Co. of Boulder City for Your Toto Construction?

Our technicians have up to 12 years of experience, and a good share of that has been spent with a wrench on a Toto fill valve rather than a brochure in hand. Toto fixtures have specific geometry. Flush volumes are tuned. A generic flapper changes how the toilet flushes; a mismatched fill valve can leave the bowl refilling wrong or the tank running at night. We spec OEM-compatible parts whenever they’re available, because on a Drake or an UltraMax II the correct part is usually the cheaper answer anyway.
Warranty-safe work matters here. When a fixture under a manufacturer warranty fails, the wrong repair can complicate a claim. We document what we find before we open anything, keep the original components where they matter, and tell you plainly when a fix falls under the maker’s coverage and when it’s just wear and tear. Every project is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s in writing, and it’s one of the longest workmanship guarantees in residential construction.
We also work in Boulder City’s actual housing stock, which is its own education. More on that below, because it changes how a Toto install should go.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Boulder City
Toto’s vitreous china rarely fails. What fails is everything bolted to it. Here’s what we see most often, and why.
- Washlet electronic seat failures on the C5 and S550e. The wand stops extending or retracting, the water won’t warm, or the seat temperature control board gives out. Boulder City’s water runs hard with dissolved minerals, and the nozzle feed line scales up over a couple of years of daily use. The scale stresses the pump and the seat, and eventually the board or the wand motor quits. Descaling on a schedule prevents most of this.
- Fill valve and flapper wear on the Drake (CST776) and UltraMax II (MS604114CEFG). Symptoms: phantom flushing in the middle of the night, a toilet that runs long after the handle was pressed, or a flush that got noticeably weaker. A degraded fill valve or a worn flapper gasket is the usual culprit. Both are wear parts, and both are inexpensive to swap.
- Flush tower and canister valve issues on the newer high-efficiency models. The tower seal degrades with mineral buildup and chlorine exposure, so the toilet runs continuously or the flush is incomplete. On the EcoPower and EcoV Promenade series, that seal is the single most common service call.
- Wax ring and closet flange leaks. When a Toto toilet was set on a floor that has since shifted, the seal underneath opens. This doesn’t always show as a puddle. More often you get a soft spot or staining at the base, or a faint sewer smell that won’t go away. Desert shrink-swell movement in the slab is a real contributor here.
- Cracked china or a damaged flush tower housing. Rare, but it happens after a hard drop or a fixture that took a hit. When the china is cracked, repair stops making sense and replacement is the honest answer.
Toto Parts & Our Repair-vs-Replace Approach

We source parts per job rather than promising a stocked shelf, so lead time depends on the specific component. OEM Toto fill valves, flappers, and Washlet seat parts are the default when they’re available. Aftermarket flappers and electronic boards frequently don’t match Toto’s flush volume calibration or the seat’s footprint and control geometry, and a cheap part that makes the toilet flush wrong isn’t a savings.
Repair or replace comes down to two questions. Is the china sound? Is the flush tower housing intact? If both answers are yes, a targeted OEM part swap is almost always far cheaper than a new fixture, and we’ll tell you so even when a new toilet would be the easier sale. If the china is cracked or the tower housing is damaged, replacement is the call. Call (888) 282-1693 and we’ll give you a straight answer on which one you’re looking at, with upfront pricing and no surprises.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We isolate the fixture and identify the actual failure before touching anything: flapper, fill valve, flush tower seal, Washlet wand motor, or board. On a Washlet, that means checking water temp, seat heat, wand travel, and nozzle scale.
- 2
Repair or install. OEM-compatible parts go in, matched to the model’s flush volume and seat geometry. If we’re setting a new Toto, we check the closet flange and wax ring while the toilet is up, not after it’s sealed.
- 3
Test. Multiple flush cycles, a refill check, and a Washlet run-through on every function. We watch for phantom flushing and standing water where it shouldn’t be. No fixture leaves the job until it behaves.
- 4
Warranty. Every job carries the 730-Day Done Right Promise. If something we touched fails, we come back and make it right. Calls are answered by a live person 24/7, so you’re not waiting until Monday to reach someone.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Boulder City
We work across Toto’s one-piece and two-piece lines, including the UltraMax II (MS604114CEFG) and the Drake (CST776), along with the EcoPower and EcoV Promenade high-efficiency series. On the electronics side, we service and install the Washlet C5 and S550e bidet seats, including descaling, wand repair, and full seat replacement.
Fixtures on their own are only part of it. These products live inside a bathroom, and that room has its own realities. In Boulder City’s older homes, a fixture swap often turns into a conversation about the floor underneath it: pier-and-beam framing, unreinforced brick walls, and knob-and-tube-era wiring that shows up the moment a vanity comes out. That’s the work we’re set up for, with full bathroom remodeling, small bathroom remodels, and tile and fixture work as the core of it. A Toto install done right includes the surface it sits on.

We Also Service These Brands
Toto is one lane, not the whole road. Groundwork Construction Co. of Boulder City works with local pros across the brand partners our projects actually call for: KraftMaid cabinetry and Kohler fixtures in kitchens and baths, GAF roofing systems, and PGT windows and doors. Multi-brand coverage means we aren’t steering every recommendation toward one product line. We spec what fits the house and the budget.
FAQs – Toto Construction Service in Boulder City

No. We’re an independent Toto service provider and we’re not affiliated with or authorized by Toto. That independence works in your favor: we recommend what actually fixes the problem, not the manufacturer’s preferred replacement path. Call (888) 282-1693 with questions about your fixture.
We use OEM Toto fill valves, flappers, and Washlet parts whenever they’re available, because aftermarket flappers and electronic boards often don’t match Toto’s flush volume or seat geometry. If an OEM part is back-ordered, we tell you the lead time upfront rather than substituting and hoping. Upfront pricing, no surprises.
Most Toto toilet repairs (flapper, fill valve, flush tower seal, wax ring) are completed in a single visit, typically under two hours. Washlet seat diagnostics take a bit longer because each electronic function gets tested. A full seat replacement or a fixture swap scheduled around a remodel follows the project timeline. Call (888) 282-1693 to talk through your job.
We service the UltraMax II (MS604114CEFG), the Drake (CST776), the EcoPower and EcoV Promenade high-efficiency series, and the Washlet C5 and S550e bidet seats. If you’re not sure which model you have, check the lid or the tank interior for the model number, and we’ll match it.
Correctly done service with OEM-compatible parts won’t void a Toto warranty, but sloppy work or mismatched aftermarket components can complicate a claim. That’s why we document what we find before we open the fixture and keep original components where coverage may depend on them. Call (888) 282-1693 for a free estimate if you’re deciding between service and a claim.
Most Toto fixture repairs land in the $400 – $1,800 range, where the part and the diagnosis drive the number. Full bathroom work runs higher:
| Service | Typical Range in Boulder City |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Current offers include $1,000 off projects over $10,000 and 0% financing for 18 months. Call (888) 282-1693 for an exact quote: estimates are free.
Book Your Toto Service in Boulder City, NV
We work Boulder City with a repair-first approach to every Toto issue, backed by OEM-compatible parts and our 730-Day Done Right Promise. Call (888) 282-1693 for a free estimate and design consult. A live person answers, day or night. Background-checked, uniformed technicians handle the work. From foundation to finish line, we’ll get your fixture right and back it in writing.
Written by the team at Groundwork Construction Co.












