







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Boulder City Homeowners Choose PGT Construction
We provide independent PGT construction service in Boulder City, NV: impact window installation, window replacement, sliding glass door repair, and seal and glass-pack replacement on PGT WinGuard and Premier Series products. What sets our PGT work apart is diagnosis. We identify the specific series and the specific failure before quoting anything, which means you pay for the failed unit, not a whole window that’s still sound. Call (888) 282-1693.

We are an independent PGT service provider. We are not affiliated with, authorized by, or endorsed by PGT, and we don’t speak for the manufacturer. What we do have is hands-on: our technicians have installed and serviced PGT windows and doors across Boulder City’s custom homes and remodels, and we know the failure points local owners actually run into. Every PGT project we take on is covered by our 730-Day Done Right Promise, priced upfront, and starts with a free estimate.
Why Trust Groundwork Construction Co. of Boulder City for Your PGT Construction?

PGT builds a specific kind of product for a specific kind of climate. WinGuard impact glass is laminated and set into heavy aluminum or vinyl frames, and Premier Series vinyl windows are built for wind load. These aren’t products you learn from a spec sheet. Our technicians have up to 12 years of experience working with them, and they know where the hardware wears, where the sealant lets go, and which parts are PGT-proprietary.
That last point matters more than most homeowners realize. PGT glass packs, rollers, locks, and weatherstripping are engineered as a system. A generic roller swapped into a WinGuard sliding door can bind under the weight of impact glass. A non-spec lock may not satisfy the impact rating the rest of the unit was built to. So we source OEM PGT replacement parts whenever they’re available, and when they aren’t, we use aftermarket equivalents that meet or exceed the original spec. We tell you which is which before we install it.
Warranty-safe service is the other half of this. We work to PGT’s installation and sealing practices on every job so that a repair or a replacement doesn’t quietly void the coverage you already paid for. That practice is backed in writing by our 730-Day Done Right Promise: if our work isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Boulder City
These are the PGT failures we see most often in Boulder City, and why they happen.
- Seal failure and fogging in WinGuard impact glass. A hazy, milky spot appears between the panes and never clears. This is the hermetic seal failing, not condensation on the surface. Years of intense desert UV and daily thermal swing (cool nights to 100°F-plus afternoons in summer) stress the perimeter seal until the argon escapes and moisture gets in. The glass still holds, but the unit is no longer doing its full job.
- Corrosion and pitting on aluminum WinGuard frames. White, chalky deposits and pitting along the sill and lower rails. Pool chemicals carried on splash and sprinkler overspray that dries on the frame are the usual culprits. The Mojave’s low humidity doesn’t protect the finish; it concentrates the mineral residue every time the water evaporates. Left alone, pitting works under the anodized finish and into the frame.
- Roller and track wear on heavy impact sliding doors. The door drags, jumps, or needs a shoulder to close. WinGuard sliding glass doors carry a lot of weight in laminated glass, and the roller assemblies and tracks wear faster than on standard-weight doors. Grit from desert wind and dust accelerates it.
- Water infiltration at sill and jamb joints. Staining, soft drywall, or a damp track after rain. Deteriorated sealant and compressed gaskets at the sill and jamb joints are almost always the cause. On a 1930s or 1940s Hoover Dam-era cottage, an opening that was never square to begin with makes this worse, and the original trim details can hide where the water is actually getting in.
- Failed locks and latches on impact-rated units. A latch that no longer engages cleanly. Impact units are rated as an assembly, so a worn or mismatched lock is a real problem, not a cosmetic one. We replace with the correct PGT-spec hardware rather than whatever fits the screw holes.
PGT Parts & Our Repair-vs-Replace Approach

We don’t stock PGT parts locally. Every part is sourced per job: we confirm the exact series, glass make-up, and hardware on your unit, then order the OEM component or the closest quality aftermarket equivalent. That takes a little planning and it’s the right way to get a fit that lasts.
Repair versus replace is where we’re most honest with Boulder City homeowners. If the frame and structure are sound and only the insulated glass unit has failed, we usually recommend replacing the glass pack or sash rather than the whole window. That decision saves real money and it preserves the original opening and trim. When the frame is corroded through, the rollers won’t track straight, or the unit has lost its impact integrity, replacement is the honest answer. We say so plainly.
Call (888) 282-1693 for a free estimate. We’ll tell you which path is right for your PGT window, in writing, before any work starts.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the PGT series and confirm the actual failure: failed seal, corroded frame, worn roller, or a leaking sill joint. You get the finding, not just a price.
- 2
Repair or install. For a repair, we order the correct OEM PGT glass pack, sash, roller, lock, or weatherstripping. For a new install, we set the unit to PGT’s sealing and flashing practices with fresh gaskets and sealant at the sill and jamb.
- 3
Test. We check operation, latch engagement, and water shedding at the sill and track before we call it done.
- 4
Warranty. Every job is covered by our 730-Day Done Right Promise, and we’re careful not to disturb PGT’s own coverage on the unit you already own.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Boulder City
We service and install the PGT lines Boulder City homes actually have: PGT WinGuard Aluminum Impact Series, WinGuard Vinyl Impact Series, Premier Series vinyl windows, and PGT Sliding Glass Doors with WinGuard impact glass. That covers glass-pack and sash replacement, roller and track service, lock and hardware replacement, sealant and gasket renewal, and full unit installation on new openings and replacements. If you’re not sure which PGT series you have, we identify it during the estimate.
We Also Service These Brands
PGT is one brand in a broader set we work with. We also service and install KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing, and Master Halco fencing, alongside other top-tier brands. If a project touches more than one trade, you’re working with one construction partner from foundation to finish line.
FAQs – PGT Construction Service in Boulder City

No. We are an independent PGT service provider, not authorized, affiliated with, or endorsed by PGT. We work on PGT products using our own hands-on experience and OEM-compatible parts, and we never represent ourselves as the manufacturer or its agent.
Yes, whenever they’re available. We source OEM PGT glass units, rollers, locks, and weatherstripping to preserve fit and warranty, and we use quality aftermarket equivalents that meet or exceed original specs only when OEM isn’t available. We tell you which you’re getting.
Most single-window repairs are completed in a single visit once the correct part is on hand. Glass-pack and sash replacements depend on the OEM lead time for your specific series, which we confirm during the estimate so you’re not guessing.
We service WinGuard Aluminum Impact Series, WinGuard Vinyl Impact Series, Premier Series vinyl windows, and PGT Sliding Glass Doors with WinGuard impact glass, including glass-pack replacement, hardware, rollers, and sealant renewal.
Not when the work is done to PGT’s installation and sealing practices, which is how we do it. We use OEM or spec-matched parts and document what we replaced, so your coverage on the rest of the unit stays intact.
PGT window work in Boulder City typically runs $8,000 – $25,000 for impact window installation and $4,500 – $15,000 for standard window replacement, depending on the number of units, series, and whether you’re repairing glass or replacing full units. Call (888) 282-1693 for an exact quote. Estimates are free, upfront, and in writing.
| PGT Service | Typical Range in Boulder City |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
Book Your PGT Service in Boulder City, NV
Whether it’s a fogged WinGuard glass pack or a full impact window installation, our background-checked, uniformed technicians handle PGT work across Boulder City with upfront pricing and the 730-Day Done Right Promise behind it. Calls are answered by a live person, 24/7. Call (888) 282-1693 for your free estimate.
Written by the team at Groundwork Construction Co..












