







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in Boulder City, NV
A fence gate in Boulder City typically runs $350 to $1,400 installed, depending on width, material, and whether it’s a walk gate or a drive gate. Most of our gate work is finished in a single visit. That’s the short answer. What follows is how we actually get there.
A gate is the part of a fence that gets touched every day and the part most installers treat as an afterthought. Homeowners call us after a gate sags, drags, or stops latching because it was hung on undersized posts with hardware meant for a lighter job. We install walk gates, double drive gates, and ornamental gates that swing true and keep swinging true – backed by our 730-Day Done Right Promise, so if it’s not done right, we make it right.
Groundwork Construction Co. of Boulder City combines Fence Installation in Boulder City as a full-scope service, so your gate is engineered into the fence line from the start rather than bolted on later. Our technicians have up to 12 years of experience with gate rigging, framing, and hardware. Calls are answered by a live person, 24/7 – no voicemail black holes. Reach us at (888) 282-1693 for a free project estimate and design consult.
Boulder City sits at just over 2,300 feet of elevation in the Mojave, and that matters for gates. The summer sun pushes surface temps on metal into triple digits. The wind coming off the McCullough Range loads a drive gate like a sail. We build for both, using branded materials such as Ameristar and Master Halco steel where the conditions demand it.

When You Need Fence Gates
Most gate calls fall into a handful of predictable scenarios. If any of these sound familiar, you’re probably a candidate for a new gate rather than a patch job.
- Your existing gate drags or won’t latch. A gate that scrapes the ground or swings open in the wind means the post is shifting or the hinge has pulled loose. On older fences in Boulder City – especially ’80s-era wood in the Historic District – we often find posts that were never set with the extra depth a gate needs, so the whole frame has crept over the years.
- You’re installing a new fence and need a gate in the run. If you’re already laying out a new fence line, adding a proper drive gate or walk gate is straightforward – and it’s far cheaper to build it into the plan than to cut one in afterward. That’s one reason we angle for a full-scope approach to Fence Installation rather than graft-on work.
- You need side-yard or backyard access for equipment. A broad double drive gate lets you pull a trailer, RV, or riding mower through to the back. Plenty of homes here have long side lots that only make sense if you can actually get a vehicle in and out.
- Wind keeps working your gate loose. Gate hardware takes more abuse than any other fence component, and the spring wind gusts through Eldorado Valley pry at a gate every day. If yours is rattling or swinging out of alignment every few months, the hardware isn’t matching the load.
- You want a locked, secure gate. Pool enclosures, side yards, and dog runs all need a gate that closes and latches reliably, not just a gate that looks closed. When security or a small child’s safety is on the line, we spec self-latching hardware and heavier-duty hinges.
- A gate fell during a monsoon microburst or was damaged by a neighbor’s tree. Things break. If a gate frame or post took a hit, we can often match the existing style and get your access back quickly.
Our Fence Gates Process
Before we ever dig, we get the details right. Here’s the sequence behind every gate we hang.
- Walk-through and measurement. We measure the opening, check grades, and confirm what the gate needs to do – walk, drive, privacy, secure – and which side it should swing. We look at what’s underneath: existing posts, soil movement, irrigation lines, and whether the ground holds moisture after storms.
- Upfront pricing, no surprises. You get a written number before any work begins, with the material line items spelled out. The number you see is the number you pay – no surprise hardware charges show up later.
- Post and frame set for the load. A gate is only as good as what holds it. We oversize gate posts and set extra depth into the soil, then frame the gate square so it stays plumb under its own weight. For heavier drive gates, we spec reinforced hardware rated for the span.
- Hang, fit, and hardware. We hang the gate, check the swing, and dial in the latches, hinges, stops, and any self-closing hardware. Every gate gets tested open and closed by hand before we call it done.
- Functional walkthrough. We walk you through the finished gate – how it latches, how it should be adjusted, what to watch for seasonally. Our technicians are background-checked and arrive in uniform, so you know exactly who’s on your property.
You can read the fuller picture of how gates fit into a larger fence build on our Fence Installation page.

Fence Gates Pricing in Boulder City
Gate pricing here depends most on size, material, and hardware, plus whether you’re adding a gate to a new fence or cutting one into an existing run. Here are honest ranges for the Boulder City market.
| Gate Type | Typical Installed Range |
|---|---|
| Walk gate (wood or vinyl, standard hardware) | $350 – $650 |
| Walk gate (ornamental steel, self-latching) | $500 – $950 |
| Double drive gate (wood or vinyl) | $900 – $1,600 |
| Double drive gate (ornamental steel, reinforced) | $1,200 – $2,200 |
| Gate cut into an existing fence line | Add $150 – $400 in labor and repair |
What moves a number up or down? Material is the biggest lever – vinyl and wood sit at the lower end, ornamental steel and custom steel at the higher end. Hardware is the second: standard hinges and a simple latch cost far less than self-closing hardware, heavier-rated hinges, and automated openers. Post depth and soil conditions can add cost on a long-span drive gate. And if we’re cutting into an existing fence, matching and repairing the run around it takes extra time.
Every gate estimate is free, and pricing is upfront – Groundwork also offers 0% financing for 18 months, plus $1,000 off projects over $10,000, so a full fence-and-gate project can fit a realistic budget. Your estimate includes a design consult, so you can compare a wood gate against an Ameristar steel gate side by side before committing.
- Free project estimate and design consult on every gate
- No-hassle upfront pricing – the number you see is the number you pay
- 0% financing for 18 months available
- $1,000 off projects over $10,000
- 730-Day Done Right Promise on all workmanship
FAQs – Fence Gates
How much does a fence gate cost in Boulder City?
A standard walk gate runs $350-$650 installed, and a double drive gate runs $900-$2,200 depending on material and hardware. Steel and self-latching gates sit at the higher end; vinyl and wood walk gates at the lower end. For an exact quote on your property, call (888) 282-1693 – estimates are free.
Can you install a gate in my existing fence?
Yes. We cut in and frame gates into most existing fence lines, then patch and match the surrounding fence as closely as we can. There’s usually a $150-$400 labor and repair adder for cutting into a finished run. Call (888) 282-1693 and we’ll take a look at what you’ve got.
What causes a gate to sag, and can it be fixed?
Sagging almost always traces back to an undersized post or hardware that can’t handle the gate’s weight and wind load. Sometimes we can rebuild the post and re-hang the gate; other times the frame itself has racked and needs replacing. We’ll tell you which after we see it in person.
Do you offer a warranty on gate work?
Yes – every gate we install is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. That covers rigging and hardware install as well as the gate structure. Call (888) 282-1693 for a free estimate and we’ll explain what’s covered in plain English.
Gates are small, but they’re the first thing you reach for every day and the first thing a visitor notices – so we treat them like the load-bearing part of your fence they really are. With branded materials like Ameristar and Master Halco, live-person answering around the clock, upfront pricing, and a 730-Day Done Right Promise, Groundwork Construction Co. of Boulder City takes the guesswork out of who to call.
If you’re ready to get a gate that swings true and keeps swinging true, call us at (888) 282-1693 for a free project estimate and design consult. We answer live, day or night, and we’ll get you a straight answer on cost and scope before anyone digs a hole.
Written by the team at Groundwork Construction Co. of Boulder City, serving Boulder City.


