







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Are Custom Windows Made? What Boulder City Homeowners Need to Know Before Preservation Review
Custom windows are made to a written specification rather than a catalog size: a manufacturer mills or extrudes the frame and sash profiles, fabricates an insulated glass unit to your exact dimensions, builds the grille pattern to the drawing, assembles the sash into the frame, then applies the finish – all to tolerances as tight as 1/8 inch. In Boulder City, that process matters because the Historic Preservation Commission can require a replacement window to match the original divided-light wood profile, and only a custom order can hit that spec.

If you’re staring down a preservation notice or a rough opening that doesn’t match anything on a showroom floor, call Groundwork Construction Co. of Boulder City at (888) 282-1693. A live person answers around the clock, and we’ll walk you through what a custom order actually involves before you commit to anything.

Why “Custom” Is a Spec, Not a Rejection
When the commission tells a homeowner their replacement has to match the “original divided-light wood profile,” that’s not a dead end. It’s a set of measurements and a drawing. Custom window manufacturing exists precisely to hit those numbers, whether the original was built in 1936 by a Bureau of Reclamation crew or added during a later infill phase east of the historic district.
The mistake we see most often is a homeowner accepting a standard vinyl quote first, then discovering the profile, cladding material, and opening dimensions don’t line up with what review requires. Starting with the spec – not the product – saves months. Our team handles Windows & Doors work across Boulder City and knows the difference between a quote that survives review and one that gets sent back.
The Manufacturing Sequence, Step by Step
Understanding how your window gets built helps you ask better questions at the kitchen table and at the review hearing. Here’s the sequence for the premium lines we work with, including Andersen and Marvin.
- Profile milling or extrusion. The frame and sash profiles are cut to the drawing – wood is milled, vinyl and aluminum are extruded, and clad products get their exterior skin applied over the structural core. The profile has to match the original sightlines, not just the overall size.
- Insulated glass unit (IGU) fabrication. Glass is cut to dimension, a spacer bar is applied around the perimeter, the cavity is filled with argon or krypton, and the whole unit is sealed. This is where thermal performance lives.
- Grille pattern application. Divided-light bars are either surface-applied (SDL) or true divided-light (TDL). In Boulder City’s historic district, review often requires TDL because SDL grilles sit on the glass surface and read as a false profile from the street. This single decision changes cost and lead time.
- Sash and frame assembly. Sash goes into frame, hardware and weatherstripping go on, and the unit is squared and checked against the spec sheet.
- Finish application. Paint or stain goes on last, and for wood windows this is where the exterior color has to match what review approved.
Every one of those steps is driven by a number on a drawing. Get the drawing wrong and the whole window is wrong.

Precision Matters More Here Than Almost Anywhere
Andersen and Marvin build custom orders to 1/8-inch increments. That precision isn’t a luxury in Boulder City – it’s a requirement. The 1930s and 40s Hoover Dam-era cottages in the historic core were built with rough openings that don’t match any standard size on the market today. Unreinforced brick walls and pier-and-beam foundations mean the opening you measure on a Tuesday may not be perfectly square, and the custom order has to account for that.
Standard-size windows get shimmed and trimmed to fit. Custom windows get built to fit. When you’re matching a Depression-era opening and a preservation drawing at the same time, only one of those approaches works.
What About Energy Efficiency? Can You Have Both?
Yes – and this is the misconception we correct most often. A homeowner assumes preservation compliance means giving up modern thermal performance. It doesn’t. Within the same custom order, you can specify Low-E coatings and a Solar Heat Gain Coefficient (SHGC) tuned for the Mojave Desert, where summer highs routinely hit 100-110°F and UV is intense.
A historically accurate exterior – correct profile, correct cladding, correct divided-light pattern – can wrap a glass package rated for desert heat. The window looks like 1936 from the sidewalk and performs like 2026 inside the living room. That’s the whole point of specifying the order correctly the first time.

Lead Time: The Number Nobody Warns You About
Custom windows from premium lines typically run 6-12 weeks from order to delivery. Add preservation review before the order can even be placed, and a Boulder City homeowner is realistically looking at a 10-20 week total timeline. Knowing that upfront changes how you plan a project, especially if you’re coordinating a home renovation around it.
| Stage | Typical Timeline |
|---|---|
| Preservation review and approval | 4-8 weeks |
| Custom window manufacturing | 6-12 weeks |
| Delivery and installation | 1-2 days on site |
For budgeting, window replacement in Boulder City generally runs $4,500-$15,000, and impact window installation runs $8,000-$25,000. Custom orders that require TDL grilles and wood profile matching sit toward the upper end of those ranges, and the exact number depends on count, size, and glazing package. Upfront pricing means the number you see is the number you pay – no surprise line items after the order goes in.
Common Boulder City Scenarios
Here’s what this looks like in practice. A homeowner near the historic district gets a notice that their replacement windows don’t match the original profile, and they need a custom order fast. Another homeowner has a 1940s cottage with a rough opening that’s three-eighths of an inch off on one side, and no standard window will sit right. A third is planning a renovation and wants to know whether custom is worth the lead time versus standard.
In every case, the answer starts with the spec drawing. Our background-checked project managers submit the preservation drawings, specify the order to the right window line, and manage the manufacturer lead time so the homeowner isn’t juggling city review and product specs at the same time. From foundation to finish line, one point of contact. Backed in writing by the 730-Day Done Right Promise – if it’s not done right, we make it right.
FAQs
Custom windows from premium lines typically take 6-12 weeks from order to delivery, and when preservation review is required before ordering, the full timeline runs 10-20 weeks. Plan for that window, not the optimistic one, and coordinate other renovation work around delivery. Call (888) 282-1693 for a realistic timeline on your specific project.
Often yes – Boulder City’s preservation review frequently requires true divided-light (TDL) grilles rather than surface-applied (SDL) bars, because TDL reads correctly in profile from the street and SDL doesn’t. The specific requirement depends on your building and the commission’s review, so confirm before ordering. We can help you read the notice and match it to the right spec – call (888) 282-1693.
Yes. Low-E coatings and a desert-tuned SHGC are specified within the same custom order, so the exterior matches the historic profile while the glass performs for Boulder City’s 100-110°F summers. The two goals aren’t in conflict when the order is written correctly. Call (888) 282-1693 for a free estimate and design consult.
It depends on the condition of the original frame and how much of the profile is salvageable. Repair can be less expensive short-term, but once the wood is compromised and the glass is failing, custom replacement is often the better long-term investment. We’ll give you a straight answer after looking at the window, not before. Estimates are free – call (888) 282-1693.
If you’d rather have it looked at, Groundwork Construction Co. of Boulder City offers a no-pressure assessment in Boulder City – call (888) 282-1693. We’ll review the preservation drawing, confirm the spec, and give you a clean number before you order anything.
Written by the team at Groundwork Construction Co. of Boulder City, serving Boulder City, NV.


