







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Spring Valley, NV: What the Job Actually Involves
Paver driveways in Spring Valley, NV typically run $7,000 to $18,000, and a standard two-car installation takes three to five working days from demo to final compaction. That price covers excavation, base prep, pavers, edge restraint, and polymeric sand. On acreage and rural lots around 89113, expect the higher end because drive lengths are longer and the ground fights back. Call (888) 282-1693 for a free on-site estimate.
The short version: this is a heavy-duty job on this side of the valley, and we build it to be done in one trip, not three.
How Our Paver Driveway Process Runs, Stage by Stage

We don’t hand you a start date and disappear. Here’s what actually happens, in order, so you know what to expect and what decisions land on your plate.
Stage 1: Site walk and layout (day 1, about an hour). We measure the drive, check slope and drainage, and look at what’s under the surface. In this part of the valley, that means scouting for caliche and planning around it. You decide the paver style and lay pattern here. This is also when we confirm your HOA’s color and pattern requirements, because some Spring Valley subdivisions are strict about it.
Stage 2: Demolition and excavation (day 1 – 2, four to eight hours). Old surface comes out, and we cut down deep enough for a proper base. Standard depth is 8 to 12 inches of compacted aggregate, and longer rural drives take more time because there’s more ground to move. If caliche shows up, we bring in rock-breaking equipment and the schedule stretches. You don’t decide anything here. We just keep you posted.
Stage 3: Base and grading (day 2 – 3, one to two days). This is the stage most contractors rush, and it’s the one that determines whether your pavers still look flat in ten years. We lay and compact the base in lifts, set the slope for drainage, and check the grade against your garage floor and the street. You approve the drainage direction before we move on. Monsoon season makes this step matter more than it does in most of the country.
Stage 4: Paver installation (day 3 – 4, one to two days). Pavers go down in the pattern you chose, cut to fit at the edges and around any curves. This is the visible progress day. You can watch it come together and flag anything that looks off before we sand.
Stage 5: Edge restraint, sand, and cleanup (day 4 – 5, half a day). We set the edge, sweep in polymeric sand, compact a final time, and haul off the debris. You get a walkthrough and the written warranty paperwork before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Actually Choose Between
You’re not picking from a catalog of a hundred colors. You’re picking from four real categories, and each has an honest trade-off.
- Concrete pavers (Unilock, Tremron): The workhorse choice. $7,000 to $13,000 for a typical two-car drive, and they hold color and shape for 25 years or more. Best fit if you want a clean look and a predictable number.
- Clay brick pavers: Warmer look, stronger color depth, higher price point on the upper end of the range. They don’t fade in this sun, but they cost more per square foot and you’ll wait longer on lead time.
- Techo-Bloc and Cambridge Pavers systems: Permeable and interlocking systems that handle drainage better than standard pavers. Worth the premium if your lot has a drainage problem or your HOA requires it.
- Lay patterns: Herringbone locks pavers together best for driveways and resists shifting. Running bond is cheaper to install and looks more traditional. Basket weave sits in between. We’ll show you samples of each on the estimate visit.
One thing to know: in extreme heat, some paver colors get hot enough to be uncomfortable barefoot, so we’ll steer you toward lighter tones if your drive gets full afternoon sun. That’s a real consideration here, not a sales pitch.
What Paver Driveways Cost in Spring Valley, NV

The working range is $7,000 to $18,000, and the number lands where it lands based on five variables. Here’s how that breaks down.
| Line item | Typical range |
|---|---|
| Base paver driveway (two-car, standard) | $7,000 – $11,000 |
| Long rural or acreage drive | $12,000 – $18,000 |
| Caliche removal or rock-breaking | Adds 10 – 20% to excavation |
| Drainage correction or regrading | $800 – $2,500 |
| Old surface demolition and haul-off | $600 – $1,800 |
Size: the single biggest driver. A standard two-car drive is around 400 square feet. A rural lot with a long approach can triple that.
Material grade: standard concrete pavers sit at the bottom of the range. Clay brick, permeable systems, and premium brand lines push toward the top.
Existing condition: tearing out concrete or asphalt costs more than starting from bare ground. If the old base is failing, we replace it, and that’s a real line item.
Ground conditions: caliche is the wild card on this side of the valley. Nobody knows the true scope until excavation starts, which is why we price the base condition openly instead of burying it.
Permit scope: most paver replacements don’t need a county permit, but new construction or a change to the driveway approach that affects the county right-of-way does. We pull what’s required and pass the inspection.
Your written estimate itemizes all five. The number you see is the number you pay, and our 730-Day Done Right Promise covers the workmanship if anything isn’t right.
See the difference
Before
After
Before
After
Before
AfterWhat Spring Valley Homes Specifically Do to This Job
Spring Valley is unincorporated Clark County, not a city, so every permitting decision runs through the Clark County Department of Building & Fire Prevention rather than a municipal office. That matters for paver driveways because the approval path depends on your lot, not your address. Build-out in 89113 has been lot-by-lot infill along the 215 Beltway and South Durango corridor instead of one master-planned buildout, which means an HOA may govern one block and not the next one over. We check jurisdiction and HOA rules before we order a single paver.
The housing stock here runs 1990s – 2000s stucco-and-tile tract homes in gated subdivisions, plus newer custom homes and mid-rise apartments. On the custom and acreage properties, driveways are longer, often with an RV pad or a detached shop, and those are the jobs that need heavier base prep and longer schedules. We regularly see failures on drives that were laid too thin over caliche – the paver surface heaves and shifts within a couple of seasons. And summer heat at 105 – 110°F means we schedule excavation early morning and protect crew and materials through the worst of the afternoon. Monsoon grading keeps us honest on drainage, even in a dry climate.
Serving Spring Valley, NV – Our Local Coverage Area
We serve Spring Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Spring Valley

Most paver driveways here finish in three to five working days, with longer rural or acreage drives running five to seven. Caliche can add a day to excavation. We give you a firm schedule in writing before the first day, and we hit it. Call (888) 282-1693 to lock in your estimate.
Usually not for a straight replacement, but a new driveway or one that changes your approach to the county right-of-way does require a Clark County permit. Because Spring Valley is unincorporated, the county handles it, not a city office. We confirm what your lot needs and pull the permit for you. Call (888) 282-1693 to check your address.
Sometimes, if the existing base is sound and the surface is low enough to accept the new pavers without raising the drive above the garage floor. If the old base is failing, laying pavers over it just transfers the problem. We inspect the base and tell you honestly which way it goes. Call (888) 282-1693 for a free assessment.
The range is $7,000 to $18,000 depending on length, material grade, and ground conditions. Standard two-car installs land near the bottom; acreage drives with caliche and drainage work land near the top. You get a written, itemized estimate with no change-order surprises. Call (888) 282-1693 for an exact quote – estimates are free.
Every paver driveway we install is covered by our 730-Day Done Right Promise – one of the longest workmanship guarantees in residential construction. If the base settles or the pavers shift because of how we built it, we make it right. That’s in writing. Call (888) 282-1693 with any questions.
Get a Free Paver Driveway Estimate in Spring Valley
If you’re planning a paver driveway in Spring Valley, call (888) 282-1693 and we’ll schedule a free on-site estimate. A live person answers around the clock, no voicemail. On the visit, we measure the drive, check the base and drainage, and hand you an itemized written price with the timeline. If it’s part of a larger project, it pairs naturally with Driveway & Pavers in Spring Valley, and many homeowners add Door Installation in Spring Valley or Cabinets & Countertops in Spring Valley while the crews are on site. Ask about our Driveway & Pavers service and coverage across Spring Valley.
Written by the team at Groundwork Construction Co.












