







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Enterprise, NV: What the Job Actually Involves
Paver driveways in Enterprise, NV typically run $7,000 – $18,000 installed, and most projects are completed in 3 – 6 working days once the design is approved. The job means tearing out the existing surface, grading and compacting a base that can handle caliche-heavy desert soil, laying the pavers, and cutting in the edges. If you’re in a master-planned subdivision off South Rainbow or near the 89139 corridor, count architectural review in that timeline too. Call (888) 282-1693 to schedule a free on-site estimate.
The Five Stages of a Paver Driveway in Enterprise

Every paver driveway we build in Enterprise follows the same sequence. No surprises, no mystery days where nobody shows up.
Stage 1: On-Site Measure and Design Approval (Day 0)
We walk the driveway, measure the footprint, check grade and drainage, and confirm what’s under the surface. If your subdivision requires architectural review, this is when you get the paver style, color, and border pattern signed off with your HOA. You choose the paver family and layout now, because ordering drives everything that follows.
Stage 2: Demolition and Haul-Off (Day 1)
Existing concrete, asphalt, or old pavers come out. This is where Enterprise soil gets interesting: caliche hardpan under many south-valley lots is tough enough that breaking and removal can take most of a day rather than a couple of hours. Debris is hauled off, not stacked on your side yard.
Stage 3: Base Prep and Grading (Days 2 – 3)
We excavate to depth, lay and compact the aggregate base in lifts, and set the slope so water runs away from the garage and toward the street or a drainage point. Monsoon-season flash flooding in this part of the valley makes this stage non-negotiable. You approve the drainage plan before we lock in the base.
Stage 4: Paver Installation and Edge Restraint (Days 3 – 5)
Pavers go down in your approved pattern, cuts are made at the borders and around any utility covers, and edge restraint is set in concrete so the field doesn’t creep. Polymeric sand goes into the joints. If your HOA requires a specific border course or a uniform color across the community, it’s honored here.
Stage 5: Cleanup and Walkthrough (Day 5 – 6)
We sweep, rinse, and walk the finished driveway with you. That walkthrough is when the 730-Day Done Right Promise gets explained in plain terms: if something isn’t right, we come back and make it right. Part of a full Driveway & Pavers in Enterprise plan? We coordinate the paver driveway with the rest of the exterior scope so there’s one schedule and one point of accountability.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Actually Choose Between
Most of the decision comes down to four things: material, color family, pattern, and border. Here’s the honest trade-off on each.
- Concrete pavers (interlocking): The workhorse choice for Enterprise driveways. Rated for vehicle loads, holds color well under intense UV, and repairs are individual-paver swaps instead of whole-slab replacement. Belgard is the brand we most often bring to the table for this. Higher upfront than asphalt, but it outlasts it.
- Clay brick pavers: The premium option. Genuine fired clay holds color the longest of anything we install, but it costs more and installs slower. Best suited to homes where the driveway is a visible design feature, not just a parking pad.
- Permeable pavers: Worth asking about if your lot has drainage issues or your HOA has stormwater rules. They let water pass through the joints into a stone reservoir. Slightly higher material cost, and the base prep is more involved.
- Pattern and border: A running-bond field with a soldier-course border is the standard look in most Enterprise subdivisions and keeps you within architectural guidelines. Herringbone costs a bit more in labor but reads as a step up. Anything more decorative than that needs HOA sign-off.
- Color: Desert-tone families (tan, sand, charcoal blends) match the stucco-and-tile look of this valley and rarely draw a review comment. Bright reds or strong contrasts sometimes do.
What Paver Driveways Cost in Enterprise, NV

Installed paver driveways in Enterprise run $7,000 – $18,000. A two-car driveway with a simple pattern usually lands near the bottom of that band. Here’s what pushes a job from one end to the other.
| Line Item | Typical Range |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Paver patio installation (if bundled) | $3,500 – $11,000 |
| Driveway sealing (after cure) | $250 – $700 |
The variables that move the number:
- Square footage and vehicle count: A single-car pad and a three-car driveway with an RV lane are not the same job. Every extra 200 square feet adds material and labor.
- What’s being removed: Hauling out a full concrete slab with rebar costs more than pulling pavers or asphalt. Caliche-hardpan excavation in some Enterprise lots adds rock-breaking time.
- Base depth and grade: A flat, well-draining lot is straightforward. A lot that needs significant re-grading or a new drainage channel adds a stage.
- Paver grade and pattern: Concrete pavers in a running bond sit at the low end. Clay brick in herringbone sits at the high end.
- Permits and HOA review: Dust-control permits, grading permits if the scope touches drainage, and architectural approval all have costs and timelines attached.
Your written estimate lists each of these separately. What it typically includes: demolition, haul-off, base prep, pavers, edge restraint, polymeric sand, and cleanup. What it typically doesn’t: sealing (we recommend waiting until the pavers cure), any utility relocation, or structural changes to the garage apron – those get quoted separately once we see them.
See the difference
Before
After
Before
After
Before
AfterWhat Enterprise Homes Specifically Do to This Job
Enterprise is one of the fastest-built-out master-planned suburbs on the valley’s south side, which changes how a paver driveway project runs compared to older parts of the metro. Most of the housing here went up in the 1990s through 2010s inside active-tract and recently-completed subdivisions, which means three things repeat on almost every job. First, architectural review is a real gate, not a formality – the community guidelines typically name approved paver styles, color families, and sometimes border patterns. Second, the approval chain runs through Clark County and the township, and dust-control requirements are enforced during demolition and grading. Third, because the homes were built in bursts by a handful of builders, driveways often share identical slopes, drainage paths, and garage apron details block after block – so the design solution that works two doors down usually works for you too. We see the same failure modes on the original builder-grade driveways around Mountain’s Edge and the Rhodes Ranch edges: surface spalling on old concrete, settling at the apron joint, and water pooling where the lot grading was always marginal. The fix is a properly compacted base, correct slope, and pavers sized for the load. Our driveway & pavers service covers the whole scope, and we work throughout Enterprise.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Enterprise

Most paver driveways in Enterprise take 3 – 6 working days from demolition to walkthrough. Add 1 – 3 weeks if architectural review and permits are required for your subdivision. Call (888) 282-1693 for a timeline specific to your lot.
Yes, most master-planned communities in Enterprise require architectural review, and grading or dust-control permits may apply depending on scope. We pull the permits and prepare the submittal package for review. Call (888) 282-1693 to confirm what your community requires.
Almost always, yes. A driveway replacement is surface and base work – it doesn’t touch plumbing, electrical, or the home’s structure unless a utility line runs under the driveway and needs to be moved, which we’d flag during the on-site estimate. Call (888) 282-1693 to have your lot checked.
$7,000 – $18,000 is the realistic installed range, and the number in your written quote is the number you pay. If we find something unexpected under the surface (a buried utility or heavier caliche than the test pits showed), we stop and quote the change before doing the work. Call (888) 282-1693 for a fixed, line-item estimate.
Every paver driveway is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (888) 282-1693 with any warranty questions before you sign anything.
Homeowners often pair a new driveway with Door Installation in Enterprise to refresh the front entry, or with Cabinets & Countertops in Enterprise when the whole home is getting updated. Call (888) 282-1693 to bundle the work into one schedule.
Get a Free Estimate on Paver Driveways in Enterprise
Call (888) 282-1693 to schedule a free on-site estimate for paver driveways in Enterprise. A live person answers, day or night. We’ll measure the footprint, confirm what’s under the surface, check your HOA’s approved styles, and hand you a written line-item quote with a fixed price. No pressure, no vague “starting at” numbers. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.












