







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Summerlin, NV: What the Job Actually Involves
A chain link fence in Summerlin typically runs $3,500 – $9,000, and most residential lots are finished in two to four working days once we’re on site. The work means setting posts below frost and wind-load depth, stretching galvanized or vinyl-coated mesh to tension, hanging gates that swing true, and tying the whole run into Summerlin’s HOA design rules and caliche-laced soil before a single bag of concrete is poured. Call (888) 282-1693 for a free on-site estimate and a written line-item quote.
How Our Chain Link Fence Process Runs, Stage by Stage

We don’t hand you a vague “we handle everything” line. Here’s the actual sequence, and what you’ll be deciding along the way.
Stage 1 – Site walk and utility locate (day 1, about an hour). We mark the line, check slope and drainage, and call in the 811 utility locate. That locate is the reason nobody digs blind in Summerlin, where irrigation lines and pool equipment runs sit close to property edges. You decide the fence line and gate placement here, because moving a gate later means resetting posts.
Stage 2 – Layout and demolition of the old run (day 1, half a day). If there’s an existing fence, we pull mesh, cut posts at grade, and haul it out. On caliche-heavy lots in the newer northwest subdivisions, breaking out old footings takes longer than the whole new install. You’ll get a heads-up if the soil changes the schedule.
Stage 3 – Post setting (day 2, full day). We auger or core through caliche, set galvanized posts in concrete, and check plumb line by line. Terminal posts and gate posts get bigger footings than line posts – that’s why a gate that sags after a year usually wasn’t set right the first time. Nothing is rushed here; concrete needs its cure time before tension goes on.
Stage 4 – Mesh, top rail, and tension (day 3). Mesh gets stretched to spec, top rail and tension bars go on, and tie wires are spaced tight. Gates get hung and adjusted for a clean swing. This is the day the fence starts looking like a fence.
Stage 5 – Final walkthrough and inspection (day 3 – 4). We walk the line with you, check every gate latch, and confirm height and setback against your HOA packet. If a permit applies, the inspection gets scheduled and passed before we call the job complete.
That’s the whole arc. Two to four days for most Summerlin residential runs, longer on acreage or where caliche fights the auger.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Chain Link Fence
Chain link isn’t one product. Here’s what actually changes the look, the lifespan, and the number on the quote:
- Galvanized vs. vinyl-coated mesh. Bare galvanized is the budget workhorse and handles desert sun fine, but vinyl-coated (in green, black, or brown) blends into desert landscaping far better and resists the wind-driven grit that scuffs bare metal over time. Coating adds roughly 15 – 25% to material cost.
- Wire gauge and mesh size. Standard residential is 11.5-gauge with a 2-inch mesh diamond. Thicker 9-gauge and tighter 1-7/8″ mesh cost more but hold up better for dogs and for security runs. We’ll match gauge to what the fence is actually doing.
- Post and rail schedule. Line posts, terminal posts, and gate posts are different sizes for a reason. Skipping a heavier gate post is the most common shortcut we see, and it’s why gates droop. We spec posts to the load, not to the cheapest line item.
- Framework brand and fittings. We use Master Halco for posts, rails, and mesh, and Ameristar where a matching gate or ornamental transition is part of the plan. Both hold tension and finish well in Summerlin’s heat.
- Gates and hardware. Walk gates, double driveway gates, self-closing hinges, and privacy slats are all add-ons that get decided at layout, not after posts are set.
- Height. 4-foot, 5-foot, and 6-foot are the residential standards. HOA rules and pool-code requirements can push you to a specific height, so check before you commit.
What a Chain Link Fence Costs in Summerlin, NV

Most residential chain link fence jobs in Summerlin land between $3,500 and $9,000. Here’s what’s inside that range:
| Scope | Typical range |
|---|---|
| Standard residential run, galvanized, 4 – 5 ft | $3,500 – $5,500 |
| Vinyl-coated, 6 ft, with walk gate | $5,000 – $7,500 |
| Larger lot, multiple gates, caliche coring | $7,000 – $9,000 |
Four variables push a Summerlin job toward the low or high end:
- Linear footage and gate count. Every extra gate adds a heavy gate post, hinge set, and latch – the most reliable cost driver.
- Soil conditions. Caliche can stop a standard auger cold and require coring. That alone can add hundreds to the labor line on a northwest Summerlin lot.
- Existing fence removal. Demo and haul-off of an old run, including concrete footings, is real labor.
- Material grade. Galvanized vs. vinyl-coated, 11.5 vs. 9-gauge, and the fitting package all move the number.
- Permit scope. Where a permit and inspection apply, that cost and time get quoted upfront.
A written estimate from us includes posts, rail, mesh, concrete, fittings, gate hardware, and demo where needed – no change orders hiding in the middle. It doesn’t include landscaping repair around the line or privacy slats unless you ask for them. No-hassle upfront pricing: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Summerlin Homes Specifically Do to This Job
Summerlin is a tale of two fence jobs. In the gated ridge communities and the west-side desert-modern builds, a chain link run has to respect strict HOA design review – height, color, and even post style get checked against the packet before a shovel moves. In the east-side villages around The Trails, we often work around original 1990s landscaping and irrigation that predates the current owner. And in the newest northwest subdivisions, caliche-laced soil stops a standard trenching shovel and requires coring equipment, which is why bids vary so much block to block. Zip code 89135 spans both extremes, so a fence quote here has to be built around your specific lot, not a per-foot formula. This work is part of the wider scope in our Fence Installation in Summerlin service, and we cover the full Summerlin footprint.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Chain Link Fence in Summerlin

Most residential chain link fence installs in Summerlin take two to four working days once the utility locate clears. Caliche coring, old-fence demo, and HOA review can each add a day. Call (888) 282-1693 for a schedule tailored to your lot.
It depends on height, location, and HOA rules, and we confirm it before we quote. Summerlin’s active HOAs have design-review requirements that often matter more than the city permit itself. We pull what’s needed and pass the inspection – you don’t chase paperwork.
In many cases, yes, if the line runs to the property edge and gates land clear of beds and irrigation. We plan the line around existing plantings at layout. When roots or drip lines sit directly on the fence line, we flag it before digging so you decide.
Plan on $3,500 – $9,000 for a standard residential run, with vinyl coating, extra gates, and caliche coring pushing toward the high end. Call (888) 282-1693 for an exact quote – estimates are free.
Every chain link fence we install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Posts, gates, and tension are all covered for the full term.
Get Your Free Chain Link Fence Estimate in Summerlin
If you’re ready to price a chain link fence in Summerlin, call (888) 282-1693. We’ll ask a few questions about lot size, gates, and HOA, then schedule a free on-site estimate with a written, line-item quote. A live person answers around the clock. If your project extends beyond the fence line, homeowners often pair this with Door Installation in Summerlin or ADU Site Prep & Utilities in Summerlin, and our Fence Installation team handles the full build.
Written by the team at Groundwork Construction Co. of Boulder City.












