







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Paradise, NV: What the Job Actually Involves
A chain link fence in Paradise, NV typically runs $3,500 to $9,000 for a standard residential side and rear yard, and most jobs finish in two to three days once we’re on site. The estimate itself is free, and you’ll get a written line-item quote before anything gets ordered. Call (888) 282-1693 to set up the walk-through; a live person answers around the clock, so you won’t be leaving a message in the dark.
How We Build a Chain Link Fence in Paradise, Start to Finish
Every chain link job here follows the same five-stage rhythm. The durations below are what we plan for on a typical residential lot, and knowing them ahead of time is the difference between a smooth week and a fence sitting half-installed while somebody waits on a part.
- Stage 1 – Mark-out and utility locate (half a day). We walk the property line with you and flag the corners and gate posts. Before a single hole is dug, the utility locate gets called in, which is non-negotiable given Paradise’s older residential blocks in the 89105 ZIP. You confirm the layout and the gate swing direction at this stage – after this, moving a post means redoing concrete.
- Stage 2 – Demolition of the old fence (3 to 6 hours). If there’s a tired chain link already standing, we pull the fabric, cut the posts at the base, and haul it off. You decide whether you want the old concrete footings chipped out or left buried below grade. Chipping out is cleaner for a fresh line but adds labor time.
- Stage 3 – Post setting and concrete cure (day one into day two). Terminal and corner posts go deeper and get more concrete than line posts, because they carry the tension. We set posts on day one and let the concrete cure overnight – roughly 24 hours before we load the fence with tension. You don’t have to be home for this stage.
- Stage 4 – Framework, fabric, and tension (4 to 8 hours). Top rail and brace bands get assembled, the mesh gets stretched, and everything gets tensioned with a come-along before hardware goes on. This is where a cheap install shows: slack mesh that sags within a season comes from skipping proper tensioning, not from the material.
- Stage 5 – Gates, walk-through, and cleanup (2 to 4 hours). Gate frames get hung and adjusted for clearance and self-closing if you spec’d it, then we walk the whole line with you. You sign off on tension, gate swing, and any touch-ups. Any concrete splatter on the hardscape gets washed down before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Chain link isn’t one product. The choices you make here are what push a job toward the low or high end of the range, and each one carries a real trade-off.
- Gauge of mesh. Standard residential is 11.5-gauge; 9-gauge is heavier and holds up far better against dogs leaning and kids climbing, at maybe 15 to 25% more material cost. In Paradise’s sun and heat, the lighter wire is more prone to bowing over the years.
- Coating. Galvanized steel is the budget standard. Vinyl-coated chain link – usually black or green – costs a bit more but shrugs off the UV exposure and looks less like a security yard. Given how hard the summer sun hits Clark County, we lean coated on anything you’ll look at every day.
- Post size and height. 2-inch posts on a 4-foot fence are the residential norm; 2-3/8-inch posts and 5 or 6 feet of height cost more but give you privacy from the alley and better wind resistance. Taller fences pick up more wind load, so they need sturdier posts and deeper footings.
- Top rail and tension wire. A top rail stiffens the whole run and looks finished. A bottom tension wire is the cheaper alternative for keeping the mesh from curling at grade. You can have both, and most homeowners do on the front-facing runs.
- Gate type. A walk gate is the standard. A double drive gate costs more and, on a wide span, benefits from a drop rod or caster to keep it from sagging. That’s a real decision to make at mark-out, not after the posts are set.
What a Chain Link Fence Costs in Paradise, NV

Plan on $3,500 to $9,000 for a residential chain link fence in Paradise, with the number landing by linear foot and by the choices above. The written estimate breaks out posts, mesh, concrete, gates, and labor as separate lines so you can see exactly where the money goes – upfront pricing, no surprises, and the number you see is the number you pay.
The variables that move a job to the low versus high end:
- Linear footage. This is the biggest lever. A short side-yard run sits near the floor; a full perimeter pushes toward the ceiling.
- Terrain and soil. Steep grades need stepped panels and more hardware. And Paradise’s older 89105 blocks frequently hit clay soil, which means wider, deeper footings and more concrete – the same reason crews here do extra foundation prep on older homes.
- Existing fence removal. Tearing out and hauling old chain link adds labor and dump fees. Leaving buried footings vs. chipping them out is a line item either way.
- Gates. Each gate adds a frame, hinges, hardware, and its own concrete footing. Double drive gates cost noticeably more than walk gates.
- Material grade. 9-gauge vinyl-coated mesh with 2-3/8-inch posts is a real step up from 11.5-gauge galvanized on 2-inch posts.
- Permit scope. A simple residential fence permit is a modest add; a taller fence or one near a corner sight line can pull in extra review.
Included in a written estimate: materials, concrete, labor, hauling, and cleanup. Typically not included: removing landscaping in the way, chipping out buried footings if you didn’t ask for it, and any HOA application fees.
See the difference
Before
After
Before
After
Before
AfterWhat Paradise Homes Specifically Do to This Job
Paradise’s housing stock is a patchwork – mid-century tract homes and apartments from the 1950s through the ’70s sitting right alongside the high-rise resorts that define the corridor. That matters for a chain link fence in a few concrete ways. On the older residential blocks, we regularly find property lines that were never clearly monumented, so a survey before we set posts saves a headache later. The 89105 soil hits that clay problem on many older lots, and a post hole that backs up with water during the cooler months won’t hold a footing, so we prep for it. Extreme summer heat and intense sun exposure dictate scheduling too – we pour footings early in the day, and the vinyl or galvanized coating needs to hold up to full-sun UV year after year, which is why coated mesh earns its keep here. Permitting runs through Clark County, and inspections focus on footing depth and post spacing. If your fence ties into a wider yard project, it’s often part of a full Fence Installation in Paradise, and homeowners often pair this with ADU Site Prep & Utilities in Paradise when a backyard build-out is in the plan. Covering all of Paradise and the blocks around it is routine for our crews.
There’s one more local texture worth naming. Paradise’s construction trade is shaped by the constant renovation cycle along the Las Vegas Strip and the Convention Center, where work gets phased around 24/7 operations and strict Clark County commercial codes – something residential-only subs never face. That discipline carries over to residential jobs: dust control, tight scheduling, and clean sites aren’t afterthoughts. If you’re also replacing an old exterior door while the fence is happening, our Door Installation in Paradise work slots in easily, and the whole scope can come through our Fence Installation service.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Paradise

Most residential chain link fences here take two to three days on site, with post concrete curing overnight between stages. Larger perimeters or heavy demolition can stretch it to four. Call (888) 282-1693 for a schedule that fits your lot.
Yes – residential fence permits in Paradise run through Clark County, with review focused on footing depth, post spacing, and height limits. We pull the permits and handle inspections as part of the job, so you’re not chasing paperwork. Estimates are free.
Usually, yes. A chain link install is posts and concrete, so there’s no plumbing or structure to relocate – the main thing we manage is staying clear of sprinkler lines and buried utilities, which the locate call handles. Landscaping in the post line is the one item you may need to address. Call (888) 282-1693 to walk your yard first.
Expect $3,500 to $9,000 for a standard residential chain link fence in Paradise, driven by linear footage, gauge and coating, gate count, soil conditions, and whether old fence comes out. Call (888) 282-1693 for an exact quote – estimates are free.
Every chain link fence we install in Paradise is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s backed in writing and applies to the workmanship, which is where most fence problems actually start. Call (888) 282-1693 to get your free estimate started.
Get a Free Chain Link Fence Estimate in Paradise
Ready to fence the yard? Call (888) 282-1693 for a free on-site estimate for your chain link fence in Paradise. We’ll walk the property line with you, call in the utility locate, measure the run, and hand you a written line-item quote the same visit – no pressure, no vague “it depends.” A live person answers 24/7, so call whenever it’s convenient for you.
Written by the team at Groundwork Construction Co.












