







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Henderson, NV: What It Costs and How Long It Takes
A standard chain link fence in Henderson, NV runs $3,500 to $9,000 installed, and most residential yards take two to three working days once the trench is dug and the concrete sets. That price covers posts, top rail, tension wire, mesh, gates, and hauling off the desert spoils from digging. Call (888) 282-1693 for a free on-site estimate and a written line-item quote before anyone touches a shovel.
How We Build a Chain Link Fence in Henderson, Start to Finish

Every yard is different, but the sequence below is how a typical Henderson chain link fence job actually runs. Knowing what happens on day one versus day three is the difference between a smooth install and a crew that shows up with no plan for the caliche under your yard.
- Stage 1 – Site walk and layout (about 1 hour). We walk the property line with you, confirm setbacks against your plat map, and mark post locations. This is when you decide gate placement, height (4, 5, or 6 feet), and whether the fence runs to the block wall or ties into it. Any utility locate request gets filed here before digging.
- Stage 2 – Utility locate and digging (day 1, 4 to 8 hours). Posts get dug or drilled to depth, which in Henderson means pre-drilling through caliche and cemented desert soil rather than hand-digging. We set terminal posts in concrete and let them cure overnight. Expect noise; this is the loudest day.
- Stage 3 – Line posts, rails, and tension (day 2, 4 to 6 hours). Line posts go in, top rail and tension wire get strung, and the frame gets squared. Gates get their hinges and latches here. You’ll want to be around to confirm gate swing direction before we lock it in.
- Stage 4 – Mesh and finishing (day 2 or 3, 2 to 4 hours). Mesh gets stretched, tied off, and trimmed. We walk the line with you to check tension and gate function, then clean the site and haul off debris.
- Stage 5 – Final walkthrough and paperwork (same day). We confirm the gate latches, the line is straight, and you have your warranty documentation in hand. That’s the 730-Day Done Right Promise – if anything isn’t right, we make it right.
Total timeline: 2 to 3 working days for a typical residential run of 100 to 200 linear feet. Longer runs or heavy gate counts can stretch to four.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Chain Link Fence
Chain link isn’t one product. The choices below are the ones that actually change the price and the lifespan of your fence, and honest trade-offs matter here.
- Gauge (wire thickness). 11.5-gauge is the standard residential weight; 9-gauge is heavier and lasts longer but costs noticeably more. For a backyard boundary, 11.5 is fine. For a run along a busy street or a dog that tests the fence, 9-gauge is worth the upgrade.
- Coating. Galvanized steel is the budget default; vinyl-coated (in black, green, or brown) lasts longer under Henderson’s UV and looks less industrial. Vinyl coating adds cost but pays back in appearance and rust resistance.
- Height. 4-foot for a property line, 5-foot is the most common residential pick, and 6-foot for security or pool-code reasons. Height drives material cost and post spacing.
- Top rail and tension wire. A full top rail plus tension wire keeps the mesh from sagging. Skipping tension wire saves a little but shows up as a wavy fence within a few years.
- Gates. Walk gates, double drive gates, and self-closing pool gates each have their own hardware. Decide gate count and swing before day one; relocating a post mid-job is expensive.
- Brands we work with. Master Halco is our go-to for chain link mesh and fittings because the product holds up under desert sun, and Ameristar components cover the gate hardware side.
What a Chain Link Fence Costs in Henderson, NV

Plan on $3,500 to $9,000 for a typical residential chain link fence in Henderson. The low end covers a straightforward 100-foot run of galvanized 4-foot fence with one walk gate. The high end covers 200-plus feet, 6-foot vinyl-coated mesh, multiple gates, and drilling through caliche.
Four things push the number up or down:
- Linear footage. The single biggest driver. Roughly $18 to $35 per linear foot installed, depending on the other factors below.
- Soil and site conditions. Henderson’s caliche and cemented desert soil can require pre-drilling or a hoe-ram, and rocky sites add labor.
- Gate count and type. Walk gates run a few hundred each; double drive gates and pool-code self-closing gates cost more.
- Material grade. Galvanized vs vinyl-coated, 11.5-gauge vs 9-gauge.
- Permit and HOA scope. If a permit or HOA submittal is required, that gets pulled into the estimate.
A written estimate from us breaks out materials, labor, gates, and disposal as separate lines – no bundled “fence package” number. The price you see is the price you pay, with no change orders mid-job. What’s not included unless we say so in writing: landscape restoration beyond basic rake-out, and any block wall repair.
See the difference
Before
After
Before
After
Before
AfterWhat Henderson Homes Do to a Chain Link Fence Job
Henderson was built on engineered ground – nearly every subdivision was graded over caliche-hard desert soil and former gypsum and borax mining ground – so post holes here fight cemented, expansive soil rather than the freeze-thaw problems builders deal with elsewhere. In Green Valley and Anthem, we regularly hit caliche hard enough to need pre-drilling or a hoe-ram, which adds time and cost to a dig that would be a hand-shovel job in a wetter climate. The 1990s-to-2000s tract subdivisions that dominate the south and east sides also mean property lines are tight, and fences often butt against post-tension slab foundations and block walls, so we plan post placement around existing utilities and structure. Down in 89015 near Water Street, the older, smaller lots mean shorter runs but more gates and tighter clearances. And because Henderson summers routinely hit 110°F+, we set posts early in the day so concrete doesn’t cure too fast and crack. If your chain link fence is part of a larger boundary or security plan, it often pairs naturally with Fence Installation in Henderson, and we cover the full city from our Henderson service area.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Henderson

Most residential chain link fences in Henderson take two to three working days from dig to final walkthrough, assuming the concrete has time to set overnight between post-setting and mesh-stretching. Call (888) 282-1693 for a timeline specific to your yard.
Permits and HOA approvals depend on your subdivision, height, and setback, so the answer is yes in some Henderson neighborhoods and no in others. We confirm what your specific property requires before we order materials.
Yes – chain link installs around existing landscaping and utilities as long as we file utility locates and plan post placement carefully. We don’t move plumbing, electrical, or irrigation unless the job specifically calls for it. If you’re planning a larger project with utility work, homeowners often pair this with ADU Site Prep & Utilities in Henderson or Door Installation in Henderson.
A typical residential chain link fence in Henderson runs $3,500 to $9,000 installed, with the price driven by linear footage, soil conditions, gate count, and material grade. Call (888) 282-1693 for a free written quote – no surprises.
Every chain link fence we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Our technicians have up to 12 years of experience, and we stand behind the work in writing.
Get a Free Chain Link Fence Estimate in Henderson
We’ll come out to your Henderson property, walk the line with you, and hand you a written, line-item estimate for your chain link fence – no pressure, no bundling, no vague “starting at” pricing. Call (888) 282-1693 and a live person will answer, day or night, and schedule your free on-site estimate. Our fence installation service is covered by the 730-Day Done Right Promise and our technicians are background-checked and show up in uniform.
Written by the team at Groundwork Construction Co.












